S. Takeda, Y. Okabe, and N. Takeda, Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors, Composites Part A: Applied Science and Manufacturing, vol.33, issue.7, pp.33-971, 2002.
DOI : 10.1016/S1359-835X(02)00036-2

M. Mulle, F. Collombet, P. Olivier, and Y. Grunevald, Assessment of cure residual strains through the thickness of carbon???epoxy laminates using FBGs, Part I: Elementary specimen, Composites Part A: Applied Science and Manufacturing, vol.40, issue.1, pp.40-94, 2009.
DOI : 10.1016/j.compositesa.2008.10.008

D. Dic, the stress analysis of a structural specimen sub jected to bending, Comp. Struct, pp.91-139, 2009.

C. Williams, J. Summerscales, and S. Grove, Resin Infusion under Flexible Tooling (RIFT): a review, Composites Part A: Applied Science and Manufacturing, vol.27, issue.7, pp.517-524, 1996.
DOI : 10.1016/1359-835X(96)00008-5

P. P. Parlevliet, H. E. Bersee, and A. Beukers, Measurement of (post-)curing strain development with fibre Bragg gratings, Polymer Testing, vol.29, issue.3, pp.291-301, 2010.
DOI : 10.1016/j.polymertesting.2009.12.002

T. Liu and G. Fernando, Processing of polymer composites: an optical fibre-based sensor system for on-line amine monitoring, Composites Part A: Applied Science and Manufacturing, vol.32, issue.11, pp.1561-1572, 2001.
DOI : 10.1016/S1359-835X(01)00003-3

L. Merad, M. Cochez, S. Margueron, F. Jauchem, M. Ferriol et al., In-situ cure monitoring using optical fibre sensors -a comparative study, Polym. Test, pp.28-42, 2009.

G. Powell, P. Crosby, D. Waters, C. France, R. Spooncer et al., cure monitoring using optical fibre sensors - a comparative study, Smart Materials and Structures, vol.7, issue.4, pp.557-568, 1998.
DOI : 10.1088/0964-1726/7/4/017

S. Vacher, J. Molimard, H. Gagnaire, and A. , Vautrin, A Fresnel's reflection optical fiber sensor for thermoset polymer cure monitoring, Polym. Polym. Comp, vol.12, issue.4, pp.269-276, 2004.

R. Murphy and . Claus, Temperature-insensitive and strain insensitive long-period grating sensors for smart structures, Opt. Eng, vol.36, pp.1872-1876, 1997.

M. Xu, J. Archambault, L. Reeckie, and J. Dakin, Discrimination between strain and temperature effects using dual-wavelength fibre grating sensors, Electronics Letters, vol.30, issue.13, pp.13-1085, 1994.
DOI : 10.1049/el:19940746

Y. Han, S. Lee, C. Kim, J. Kang, U. Paek et al., Simultaneous measurement of temperature and strain using dual long-period fiber gratings with controlled temperature and strain sensitivities, Optics Express, vol.11, issue.5, pp.476-481, 2003.
DOI : 10.1364/OE.11.000476

S. Triollet, L. Robert, E. Marin, and Y. Ouerdane, Discriminated measures of strain and temperature in metallic specimen with embedded superimposed long and short fibre Bragg gratings, Measurement Science and Technology, vol.22, issue.1, pp.22-015202, 2011.
DOI : 10.1088/0957-0233/22/1/015202
URL : https://hal.archives-ouvertes.fr/hal-00736789

H. J. Patrick, G. M. Williams, A. D. Kersey, J. R. Pedrazzani, and A. M. Vengsarkar, Hybrid fiber Bragg grating/long period fiber grating sensor for strain/temperature discrimination, IEEE Photonics Technology Letters, vol.8, issue.9, pp.1223-1225, 2006.
DOI : 10.1109/68.531843

M. Song, S. Lee, S. Choi, and B. Lee, Simultaneous Measurement of Temperature and Strain Using Two Fiber Bragg Gratings Embedded in a Glass Tube, Optical Fiber Technology, vol.3, issue.2, pp.194-196, 1997.
DOI : 10.1006/ofte.1997.0215

K. Kuang, L. Zhang, W. Cantwell, and I. Bennion, Process monitoring of aluminium-foam sandwich structures based on thermoplastic fibre-metal laminates using fibre Bragg gratings, Comp. Sci. Tech, pp.65-669, 2005.

M. Mulle, F. Collombet, P. Olivier, R. Zitoune, C. Huchette et al., Assessment of cure-residual strains through the thickness of carbon???epoxy laminates using FBGs Part II: Technological specimen, Composites Part A: Applied Science and Manufacturing, vol.40, issue.10, pp.40-1534, 2009.
DOI : 10.1016/j.compositesa.2009.06.013

J. S. Leng and A. Asundi, Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors, Smart Materials and Structures, vol.11, issue.2, pp.249-255, 2002.
DOI : 10.1088/0964-1726/11/2/308

V. Bhatia, Applications of long-period gratings to single and multi-parameter sensing, Optics Express, vol.4, issue.11, pp.457-466, 1999.
DOI : 10.1364/OE.4.000457

W. Jin, W. Michie, G. Thursby, M. Konstantaki, and B. Culshaw, Simultaneous measurement of strain and temperature: error analysis, Optical Engineering, vol.36, issue.2, pp.598-609, 1997.
DOI : 10.1117/1.601233

M. C. Kazilas, Acquisition and Interpretation of Dielectric Data For Thermoset Cure Monitoring, 2003.

Y. Wang, B. Han, D. W. Kim, A. Bar-cohen, and P. Joseph, Integrated Measurement Technique for Curing Process-Dependent Mechanical Properties of Polymeric Materials Using Fibre Bragg Grating, Exp. Mech, pp.48-107, 2008.

K. Magniez, A. Vijayan, and N. Finn, Apparent volumetric shrinkage study of RTM6 resin during the curing process and its effect on the residual stresses in a composite, Polymer Engineering & Science, vol.57, issue.11
DOI : 10.1002/pen.22088

C. Chapeleau, D. Boisrobert, and . Delaunay, Quantitative control of RTM6 epoxy resin polymerisation by optical index determination, Comp. Sci. Tech, vol.67, pp.3196-3201, 2007.

J. Guemes and J. Menendez, Response of Bragg grating fiber-optic sensors when embedded in composite laminates, Composites Science and Technology, vol.62, issue.7-8, pp.959-966, 2002.
DOI : 10.1016/S0266-3538(02)00010-6

F. Colpo, L. Humbert, P. Giaccari, and J. Botsis, Characterization of residual strains in an epoxy block using an embedded FBG sensor and the OLCR technique, Composites Part A: Applied Science and Manufacturing, vol.37, issue.4
DOI : 10.1016/j.compositesa.2005.05.009
URL : https://hal.archives-ouvertes.fr/hal-00276729