F. Ali, Modélisation et simulation thermomécanique de la coupe des métaux, p.436, 2001.

B. O. Axelsson, Lateral cutting force during machining of wood due to momentary 438 disturbances in the wood structure and degree of wear of the cutting tool, Holz Roh Werkst, vol.52, issue.3, pp.439-198, 1994.

B. O. Axelsson, S. A. Grundberg, and J. A. Grönlund, Tool wear when planning and 441 milling. Measurement methodology and influencing factors, pp.442-467, 1993.

J. Beauchêne, Evolution du comportement mécanique du bois vert avec la particleboard, Proceedings of the 2 nd International Symposium on Wood Machining, 1996.

J. C. Butaud, C. Decès-petit, and R. Marchal, An Experimental Device for the Study of 457, 1995.

J. P. Cordebois, Viscoplastic modelling of cutting in turning, Journal of materials 460 processing technology, pp.187-200, 1994.

J. Costes, Measurements without contact of vibration during milling : two exemples 462 of applications in machining operations monitoring, Lecture in Training School of COST, p.463, 2007.

J. Costes and P. Larricq, Towards high cutting speed in wood milling, Annals of Forest Science, vol.59, issue.8, pp.465-857, 2002.
DOI : 10.1051/forest:2002084
URL : https://hal.archives-ouvertes.fr/hal-00881899

G. Cyra and C. Tanaka, The effects of grain orientation on routing surface, finish, cutting 467 forces and acoustic emission. Proceeding of IWMS 13, pp.323-331, 1997.

L. E. Denaud, L. Bléron, A. Ratle, and R. Marchal, a) Online control of wood peeling 479 process: Acoustical and vibratory measurements of lathe checks frequency, Ann. For. Sci, vol.480, issue.64, pp.569-575, 2007.

L. E. Denaud, L. Bléron, A. Ratle, and R. Marchal, b) On-line measurement of the average 482 lathe checks frequency of peeled veneers, Proceedings of the 3rd International Symposium on 483, 2007.

F. Eyma, P. Méausoone, and P. Martin, Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B., Annals of Forest Science, vol.61, issue.1, pp.55-64, 2004.
DOI : 10.1051/forest:2003084
URL : https://hal.archives-ouvertes.fr/hal-00883828

R. Fisher, Wood cutting simulation ? A program to experiment without a machine, p.489, 1999.

R. Fisher, Microprocesses at cutting edge ? Some basics of machining wood, p.491, 2004.

U. Heisel, J. Tröger, and S. Martynenko, Aspects on high-performance cutting with 502 machining centres, Proceedings of the 2 nd International Symposium on Wood Machining, p.503, 2004.

U. Heisel, S. Martynenko, and M. Schneider, Influence of chip space filling on cutting 505 forces in high-speed milling of wood and derived timber products, Proceedings of the 3 rd 506, 2007.

R. E. Hernández and G. Rojas, Effects of knife jointing and wear on the planed surface 508 quality. of sugar maple wood, Wood Fiber Sci, vol.34, pp.293-305, 2002.

Y. Huang, Cutting force components in orthogonal cutting parallel to the grain 510 (90-0). II. Effect of feed lengths, Mokuzai Gakkaishi, vol.40, issue.10, pp.1059-1066, 1994.

P. Iskra and C. Tanaka, Einfluss der Richtung der Holzfasern, des Vorschubs und der Schnittbreite auf die Schallintensit??t beim Fr??sen, Holz als Roh- und Werkstoff, vol.43, issue.9, pp.167-172, 2005.
DOI : 10.1007/s00107-004-0541-7

P. Iskra and C. Tanaka, A comparison of selected acoustic signal analysis techniques to 514 evaluate wood surface roughness produced during routing, Wood Sci. Technol, vol.63, issue.3, pp.247-515, 2006.

W. Mckenzie, Fundamental aspects of wood cutting process, Forest Products Journal, vol.551, issue.9, pp.447-456, 1960.

W. Mckenzie, The Relationship Between the Cutting Properties of Wood and 553, 1962.

W. Mckenzie and H. Karpovich, Wear and blunting of the tool corner in cutting a wood- 555 based material, Wood Sci. Technol, vol.1, issue.9, pp.59-73, 1975.

W. M. Mckenzie, P. Ko, R. Cvitkovic, and M. Ringler, Towards a model predicting cutting forces and surface quality in routing layered boards, Wood Science and Technology, vol.35, issue.6, pp.563-569, 2001.
DOI : 10.1007/s002260100115

R. Marchal, Valorisation par tranchage et déroulage des bois de chênes 559 méditerranéens, pp.294-560, 1989.

R. Marchal, C. Dai, and B. Wang, La surveillance du déroulage par analyse acoustique et 561 vibratoire : Résultats préliminaires, 6ème Séminaire PPF "Maîtrise globale du procédé 562 d, 2000.

R. Marchal, D. Jullien, F. Mothe, and B. Thibaut, Mechanical aspects of heating wood 564 in rotary veneer cutting, pp.25-27, 1993.

F. Mothe, B. Thibaut, R. Marchal, and M. Negri, Rotary cutting simulation of 576 heterogeneous wood : application to douglas fir peeling, Proceedings of the 13th International, 1997.

Y. Murase and S. Harada, Acoustic Emission Characteristics in Wood Cutting I : Effect 582 of the grain angles on the amplitude of the acoustic emission, Mokuzai Gakkaishi, vol.41, issue.379, pp.373-583, 1995.

Y. Murase, H. Nogami, and T. Ohuchi, Acoustic Emission Characteristics in Veneer 585 with a Roller Bar, Proceedings of the 2nd ISWM, pp.5-7, 2004.

K. Nagatomi, K. Yoshida, K. Banshoya, and Y. Murase, Recognisation of wood cutting 587 conditions trough cutting sounds I: Effect of tool system's stiffness and tool wear on the 588 generation of sound in cutting parallel to the grain, Mokuzai Gakkaishi, vol.39, issue.5, pp.521-528, 1993.

G. Sinn, H. Mayer, B. Zettl, C. Ede, and P. Beer, Application of ultrasonic-assisted 603 cutting in wood machining, Proceedings of 2 nd International symposium on wood machining, p.604, 2004.

H. A. Stewart, Optimal rake angle related to selected strength properties of wood, p.606, 1977.

H. A. Stewart, A comparison of tool materials, coatings, and treatments related to tool 608 wear during wood machining, Forest Products Journal, vol.41, issue.9, pp.61-64, 1991.

B. Thibaut, Le processus de coupe du bois par déroulage, p.612, 1988.

G. E. Woodson and P. Koch, Tool forces and chip formation in orthogonal cutting of 624 loblolly pine. Forest Service Research Paper SO-52, 1970.