Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining, International Journal of Machine Tools and Manufacture, vol.46, issue.7-8, pp.782-800, 2006. ,
DOI : 10.1016/j.ijmachtools.2005.07.024
Analysis of the influence of tool type, coatings, and machinability on the thermal fields in orthogonal machining of AISI 4140 steels, CIRP Annals, vol.58, issue.1, pp.85-88, 2009. ,
DOI : 10.1016/j.cirp.2009.03.085
A new friction law for sticking and sliding contacts in machining, Tribology International, vol.44, issue.7-8, pp.764-771, 2011. ,
DOI : 10.1016/j.triboint.2011.01.007
Assessment of Digital Image Correlation Measurement Errors: Methodology and Results, Experimental Mechanics, vol.43, issue.4, pp.353-370, 2008. ,
DOI : 10.1117/12.7972925
URL : https://hal.archives-ouvertes.fr/hal-00881043
´ Etude du comportement en sollicitation extrême et de l'usinabilité d'un nouvel alliage de titane aeronautique : le Ti555-3, 2010. ,
New methods in the study of plastic deformation in the cutting zone, CIRP Annals, vol.21, pp.17-18, 1972. ,
NUMERICAL SIMULATION OF TITANIUM ALLOY DRY MACHINING WITH A STRAIN SOFTENING CONSTITUTIVE LAW, Machining Science and Technology, vol.51, issue.2, pp.244-257, 2010. ,
DOI : 10.1016/j.msea.2004.01.012
URL : https://hal.archives-ouvertes.fr/hal-00911132
Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials, International Journal of Refractory Metals and Hard Materials, vol.27, issue.3 ,
DOI : 10.1016/j.ijrmhm.2008.09.005
URL : https://hal.archives-ouvertes.fr/hal-00909740
Subsurface deformation patterns around indentation in workhardened mild steel ,
A new visio-plasticity technique and a study of curly chip formation, International Journal of Mechanical Sciences, vol.13, issue.4, pp.375-387, 1971. ,
DOI : 10.1016/0020-7403(71)90061-0
Friction modelling in metal cutting, Wear, vol.260, issue.3, pp.310-318, 2006. ,
DOI : 10.1016/j.wear.2005.01.052
An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, issue.16, pp.1759-1788, 2000. ,
DOI : 10.1016/S0020-7225(00)00002-1
Ductility and workability of metals, 14] C. Courbon. Vers une modélisation physique de la coupe des aciers spéciaux : intégration du comportement métallurgique et des phénomènes tribologiques et thermiques aux interfaces, pp.33-39, 1968. ,
Chip formation, friction and high quality machined surfaces, Surface Treatment of Metals, vol.29, pp.299-378, 1941. ,
On the FE codes capability for tool temperature calculation in machining processes, Journal of Materials Processing Technology, vol.174, issue.1-3, pp.286-292, 2006. ,
DOI : 10.1016/j.jmatprotec.2006.01.012
Chip Formation in Machining Ti6Al4V at Extremely High Cutting Speeds, CIRP Annals, vol.50, issue.1, pp.49-52, 2001. ,
DOI : 10.1016/S0007-8506(07)62068-X
Machinability and surface integrity for a bearing steel and a titanium alloy in laser assisted machining (optimisation on LAM on two materials), Lasers in Engineering, vol.17, pp.5-6329, 2007. ,
Direct measurement of large-strain deformation fields by particle tracking, Measurement Science and Technology, vol.20, issue.9, p.95710, 2009. ,
DOI : 10.1088/0957-0233/20/9/095710
Deformation field in large-strain extrusion machining and implications for deformation processing, Scripta Materialia, vol.66, issue.5, pp.235-238, 2012. ,
DOI : 10.1016/j.scriptamat.2011.10.045
A novel ultra-high speed camera for digital image processing applications, Measurement Science and Technology, vol.19, issue.8, p.85503, 2008. ,
DOI : 10.1088/0957-0233/19/8/085503
An experimental investigation of the behaviour of steels over large temperature and strain rate ranges, International Journal of Mechanical Sciences, vol.67, pp.108-122, 2013. ,
DOI : 10.1016/j.ijmecsci.2013.01.003
URL : https://hal.archives-ouvertes.fr/hal-01068071
Prediction of chip morphology and segmentation during the machining of titanium alloys, Journal of Materials Processing Technology, vol.150, issue.1-2, pp.124-133, 2004. ,
DOI : 10.1016/j.jmatprotec.2004.01.028
Material behaviour in metal cutting: strains, strain rates and temperatures in chip formation, Journal of Materials Processing Technology, vol.121, issue.1, pp.123-135, 2002. ,
DOI : 10.1016/S0924-0136(01)01227-4
On the Mechanics of Chip Segmentation In Machining, Journal of Engineering for Industry, vol.103, issue.1, pp.33-51, 1981. ,
DOI : 10.1115/1.3184458
New observations on the mechanism of chip formation when machining titanium alloys, Wear, vol.69, issue.2, pp.179-188, 1981. ,
DOI : 10.1016/0043-1648(81)90242-8
Multi scale modal decomposition of primary form, waviness and roughness of surfaces, Scanning, vol.33, issue.5, pp.332-341, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00633039
The theory of plasticity applied to a problem of machining, J.Appl.Mech, vol.18, pp.405-413, 1951. ,
Strain, strain rate and velocity fields determination at very high cutting speed, Journal of Materials Processing Technology, vol.213, issue.5, pp.693-699, 2013. ,
DOI : 10.1016/j.jmatprotec.2012.11.021
URL : https://hal.archives-ouvertes.fr/hal-01502115
A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.214-221, 2006. ,
DOI : 10.1016/j.jmatprotec.2006.03.159
URL : https://hal.archives-ouvertes.fr/hal-00938632
Machining Characteristics of Hard Materials, CIRP Annals, vol.37, issue.1, pp.89-92, 1988. ,
DOI : 10.1016/S0007-8506(07)61592-3
Mean intensity gradient: An effective global parameter for quality assessment of the speckle patterns used in digital image correlation, Optics and Lasers in Engineering, vol.48, issue.4, pp.469-477, 2010. ,
DOI : 10.1016/j.optlaseng.2009.08.010
Study on subset size selection in digital image correlation for speckle patterns, Optics Express, vol.16, issue.10, pp.7037-7048, 2008. ,
DOI : 10.1364/OE.16.007037
High-Accuracy 2D Digital Image Correlation Measurements with Bilateral Telecentric Lenses: Error Analysis and Experimental Verification, Experimental Mechanics, vol.44, issue.1, pp.1719-1733, 2013. ,
DOI : 10.1016/j.optlastec.2011.06.019
A new filtering approach dedicated to heat sources computation from thermal field measurements, Photomechanics, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00938117
Study on the use of motion compensation techniques to determine heat sources. Application to large deformations on cracked rubber specimens In-process high-speed photography applied to orthogonal turning, Experimental Mechanics Journal of Materials Processing Technology, vol.49, issue.202, pp.561-574475, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00454679
Machining titanium, In MIT Rep, 1954. ,
Identification of Material Constitutive Laws for Machining???Part I: An Analytical Model Describing the Stress, Strain, Strain Rate, and Temperature Fields in the Primary Shear Zone in Orthogonal Metal Cutting, Journal of Manufacturing Science and Engineering, vol.12, issue.5, 2010. ,
DOI : 10.1063/1.338024
Finite element analysis of the rake angle effects in orthogonal metal cutting, International Journal of Mechanical Sciences, vol.38, issue.1, pp.1-17, 1995. ,
DOI : 10.1016/0020-7403(95)00036-W
The effect of out-of-plane motion on 2D and 3D digital image correlation measurements, Optics and Lasers in Engineering, vol.46, issue.10, pp.746-757, 2008. ,
DOI : 10.1016/j.optlaseng.2008.05.005
URL : https://hal.archives-ouvertes.fr/hal-01644893
Parameter choice for optimized digital image correlation, Optics and Lasers in Engineering, vol.47, issue.6, pp.728-737, 2009. ,
DOI : 10.1016/j.optlaseng.2008.10.015
URL : https://hal.archives-ouvertes.fr/hal-00334368
Bidimensional strain measurement using digital images, Proc. Inst, pp.811-817, 1999. ,
DOI : 10.1117/12.166931
Mechanics of Saw-Tooth Chip Formation in Metal Cutting, Journal of Manufacturing Science and Engineering, vol.107, issue.2, pp.163-172, 1999. ,
DOI : 10.1016/S0007-8506(16)30003-8
Shape features and finite element model updating from full-field strain data, International Journal of Solids and Structures, vol.48, issue.11-12, pp.1644-1657, 2011. ,
DOI : 10.1016/j.ijsolstr.2011.02.010
URL : https://doi.org/10.1016/j.ijsolstr.2011.02.010