, The Internet of Things: A survey, Comput. Networks, pp.2787-2805, 2010.
DOI : 10.1016/j.comnet.2010.05.010
, Progress Towards the First Wireless Sensor Networks Consisting of Inkjet-Printed, Paper-Based RFID-Enabled Sensor Tags, Proc. IEEE, pp.1601-1609, 2010.
DOI : 10.1109/JPROC.2010.2049622
, Inkjet Printing-Process and Its Applications, Advanced Materials, vol.17, issue.6, pp.673-685, 2010.
DOI : 10.1002/10.1039/B903531A
, Inkjet Printing for Materials and Devices, Chemistry of Materials, vol.13, issue.10, pp.3299-3305, 2001.
DOI : 10.1021/cm0101632
, RFID Tag and RF Structures on a Paper Substrate Using Inkjet-Printing Technology, IEEE Transactions on Microwave Theory and Techniques, vol.55, issue.12, pp.2894-2901, 2007.
DOI : 10.1109/TMTT.2007.909886
, Evaluation of Inkjet Technology for Electronic Packaging and System Integration, 2007 Proceedings 57th Electronic Components and Technology Conference, pp.89-94, 2007.
DOI : 10.1109/ECTC.2007.373781
, High-resolution electrohydrodynamic jet??printing, Nature Materials, vol.19, issue.10, pp.782-789, 2007.
DOI : 10.1038/nmat1974
, Inkjet-Printed Polymer Films for the Detection of Organic Vapors, IEEE Sensors Journal, vol.6, issue.6, pp.1435-1444, 2006.
DOI : 10.1109/JSEN.2006.884168
, Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes, Small, vol.44, issue.474, pp.1021-1025, 2006.
DOI : 10.1002/smll.200600061
, Development of a Bioactive Paper Sensor for Detection of Neurotoxins Using Piezoelectric Inkjet Printing of Sol???Gel-Derived Bioinks, Analytical Chemistry, vol.81, issue.13, pp.5474-5483, 2009.
DOI : 10.1021/ac900660p
, Direct-write inkjet printing for fabrication of barium strontium titanate-based tunable circuits, Thin Solid Films, vol.515, issue.7-8, pp.7-83820, 2007.
DOI : 10.1016/j.tsf.2006.10.009
, An Inkjet-Printed Solar-Powered Wireless Beacon on Paper for Identification and Wireless Power Transmission Applications, IEEE Transactions on Microwave Theory and Techniques, vol.60, issue.12, pp.4178-4186, 2012.
DOI : 10.1109/TMTT.2012.2222922
, MicroStrip-to-SIW transition: (a) geometry: Wfeed = 2.8 mm, Wtaper = 6 mm, LSIW = 23 mm, WSIW = 24 mm, Dvia = 2 mm, Pvia = 2 mm
, Measured scattering parameters of microstrip-to-SIW transition. Antennas, Sensors, and Circuits on Paper Substrate, IET Microw. Antennas Propag, vol.157, issue.10, pp.858-868, 2013.
, Inkjet printing of electrical vias, European Microelectron. Packag. Conf, pp.1-4, 2011.
, Inkjet Printed Via-Hole Interconnections and Resistors for All-Polymer Transistor Circuits, Advanced Materials, vol.13, issue.21, pp.1601-1605, 2001.
DOI : 10.1002/1521-4095(200111)13:21<1601::AID-ADMA1601>3.3.CO;2-O
, Nano-silver inkjet printed interconnections through the microvias for flexible electronics, 2011 11th IEEE International Conference on Nanotechnology, pp.473-477, 2011.
DOI : 10.1109/NANO.2011.6144291
, All inkjet printed 3D microwave capacitors and inductors with vias, 2013 IEEE MTT-S International Microwave Symposium Digest (MTT), pp.1-3, 2013.
DOI : 10.1109/MWSYM.2013.6697784
, Fully inkjet-printed multilayer microstrip and T-resonator structures for the RF characterization of printable materials and interconnects, 2014 IEEE MTT-S International Microwave Symposium (IMS2014), 2014.
DOI : 10.1109/MWSYM.2014.6848664
, Review of substrate-integrated waveguide circuits and antennas, IET Microwaves, Antennas & Propagation, vol.5, issue.8, pp.909-920, 2011.
DOI : 10.1049/iet-map.2010.0463
, Inkjet-printed paper-based substrate-integrated waveguide (SIW) components and antennas, International Journal of Microwave and Wireless Technologies, vol.14, issue.03, 2013.
DOI : 10.1109/TMTT.2002.807820
, Polymethylmethacrylate membrane for fluid encapsulation and release in microfluidic systems, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.22, issue.3, pp.1067-1072, 2004.
DOI : 10.1116/1.1705582
, A Review of Microstrip T-Resonator Method in Determining the Dielectric Properties of Printed Circuit Board Materials, IEEE Transactions on Instrumentation and Measurement, vol.56, issue.5, pp.1845-1850, 2007.
DOI : 10.1109/TIM.2007.903587
, Spreading of an Inkjet Droplet on a Solid Surface with a Controlled Contact Angle at Low Weber and Reynolds Numbers, Langmuir, vol.24, issue.6, pp.2900-2907, 2008.
DOI : 10.1021/la702504v
, Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect, Langmuir, vol.24, issue.5, pp.2224-2231, 2008.
DOI : 10.1021/la7026847
, Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates, Advanced Materials, vol.25, issue.2, pp.343-345, 2008.
DOI : 10.1002/adma.200701876
, Ink-jet Printing and Microwave Sintering of Conductive Silver Tracks, Advanced Materials, vol.30, issue.16, pp.2101-2104, 2006.
DOI : 10.1002/adma.200502422
URL : http://repository.tue.nl/621662
, No Battery Required: Perpetual RFID-Enabled Wireless Sensors for Cognitive Intelligence Applications, IEEE Microwave Magazine, vol.14, issue.5, pp.66-77, 2013.
DOI : 10.1109/MMM.2013.2259398
, One-step inkjet printing of conductive silver tracks on polymer substrates, Nanotechnology, vol.20, issue.16, 2009.
DOI : 10.1088/0957-4484/20/16/165303
, Losses in Microstrip, IEEE Transactions on Microwave Theory and Techniques, vol.16, issue.6, pp.342-350, 1968.
DOI : 10.1109/TMTT.1968.1126691
, Permittivity and Loss Tangent Characterization for Garment Antennas Based on a New Matrix-Pencil Two-Line Method, IEEE Transactions on Antennas and Propagation, vol.56, issue.8, pp.2548-2554, 2008.
DOI : 10.1109/TAP.2008.927556
, Rapid Self-Assembly of Monodisperse Colloidal Spheres in an Ink-Jet Printed Droplet, Chemistry of Materials, vol.16, issue.22, pp.4212-4215, 2004.
DOI : 10.1021/cm035256t
, Mechanically Tunable Substrate Integrated Waveguide (SIW) Cavity Based Oscillator, IEEE Microwave and Wireless Components Letters, vol.23, issue.9, pp.489-491, 2013.
DOI : 10.1109/LMWC.2013.2274040
, Compact CPW-Fed Combline Filter in Substrate Integrated Waveguide Technology, IEEE Microwave and Wireless Components Letters, vol.22, issue.1, pp.7-9, 2012.
DOI : 10.1109/LMWC.2011.2174215
, Accurate modeling, wave mechanisms, and design considerations of a substrate integrated waveguide, IEEE Transactions on Microwave Theory and Techniques, vol.54, issue.6, pp.2516-2526, 2006.
DOI : 10.1109/TMTT.2006.875807
, Design equations for tapered microstrip-to-Substrate Integrated Waveguide transitions, IEEE MTT-S Int. Microw. Symp. Dig, pp.704-707, 2010.
, ???Invisible??? Silver Tracks Produced by Combining Hot-Embossing and Inkjet Printing, Advanced Functional Materials, vol.21, issue.3, pp.1031-1038, 2008.
DOI : 10.1002/adfm.200601062
, 15) received the B.S. degree in Electrical and Electronic Engineering from Yonsei University He received the M.S. and PhD degree in Electrical and Computer Engineering from Georgia Institute of Technology, respectively. He is now with Qualcomm, and working on the design and analysis of inductors/transformers for high power CMOS power amplifier (PA) and LNA modules for wireless communication applications, 2010.
, He serves as an Associate Editor of Electronics Letters and he is a member of the editorial board of International Journal of Microwave Science and Technology and of International Journal of Antennas and Propagation. Dr. Aubert is the General Chairman of the European Microwave Week, refereed journals and 200 communications in International Symposium Proceedings He is expert for the French National Research Agency (ANR) since 2009 and for the European Commission since 2012, 2015.
, 89?M'92?SM'03?F'10) received the Diploma Degree in electrical and computer engineering from the National Technical University of Athens, Athens, Greece and the M.S. and Ph.D. degrees in electrical engineering and computer science from the University of Michigan
, electronics, energy harvesting and wireless power transfer systems, NFC systems, nanotechnology applications in RF, origami-folded electromagnetics, microwave MEMs, SOP-integrated (UWB, multiband, mmWave, conformal) antennas and heads the ATHENA research group (20 researchers) He has served as the Head of the GT-ECE Electromagnetics Technical Interest Group, as the Georgia Electronic Design Center Associate Director for RFID/Sensors research from 2006?2010 and as the Georgia Tech NSF-Packaging Research Center Associate Director for RF Research and the RF Alliance Leader from He was a Visiting Professor with the Technical University of Munich, Germany for the summer of 2002, a Visiting Professor with GTRI-Ireland in Athlone, Ireland for the summer of 2009, and a Visiting Professor with LAAS-CNRS in Toulouse, France for the summer of 2010. He has given more than 100 invited talks to various universities and companies all over the world. Dr. Tentzeris was the recipient/co-recipient of the 2015 IET Microwaves, Antennas and Propagation Premium Award, the 2014 Georgia Tech ECE Distinguished Faculty Achievement Award, Best Student Paper Award, the 2013 IET Microwaves, Antennas and Propagation Premium Award, the 2012 FiDiPro Award in Finland, the iCMG Architecture Award of Excellence, the 2010 IEEE Antennas and Propagation Society Piergiorgio L. E. Uslenghi Letters Prize Paper Award, the 2011 International Workshop on Structural Health Monitoring Best Student Paper Award, the 2010 Georgia Tech Senior Faculty Outstanding Undergraduate Research Mentor Award, the 2009 IEEE Transactions on Components and Packaging Technologies Best Paper Award, the 2009 E.T.S.Walton Award from the Irish Science Foundation, the 2007 IEEE APS Symposium Best Student Paper Award, the 2007 IEEE IMS Third Best Student Paper Award, the 2007 ISAP 2007 Poster Presentation Award, the 2006 IEEE MTT Outstanding Young Engineer Award, the 2006 Asian-Pacific Microwave Conference Award, the 2004 IEEE Transactions on Advanced Packaging Commendable Paper Award, the 2003 NASA Godfrey " Art " Anzic Collaborative Distinguished Publication Award, the 2003 IBC International Educator of the Year Award, the 2003 IEEE CPMT Outstanding Young Engineer Award, the 2002 International Conference on Microwave and Millimeter-Wave Technology Best Paper Award the 2002 Georgia Tech-ECE Outstanding Junior Faculty Award, the 2001 ACES Conference Best Paper Award and the 2000 NSF CAREER Award and the 1997 Best Paper Award of the International Hybrid Microelectronics and Packaging Society. He was the TPC Chair for IEEE IMS 2008 Symposium and the Chair of the 2005 IEEE CEM-TD Workshop and he is the Vice-Chair of the RF Technical Committee (TC16) of the IEEE CPMT Society. He is the founder and chair of the RFID Technical Committee (TC24) of the IEEE MTT Society and the Secretary/Treasurer of the IEEE C-RFID. He is an Associate Editor of IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, IEEE TRANSACTIONS ON ADVANCED PACKAGING, and the International Journal on Antennas and Propagation. He is a member of URSI-Commission D, a member of MTT-15 committee, an Associate Member of the European Microwave Association, a Fellow of the Electromagnetic Academy, and a member of the Technical Chamber of Greece. He served as one of the IEEE Microwave Theory and Techniques Society Distinguished Microwave Lecturers from 2010?2012, and he is currently serving as one the IEEE C-RFID Distinguished Lecturers, 2003.