A. R. Rosenfield, D. K. Shetty, and W. H. Duckworth, Estimating Tensile Creep Data from Flexure Data, Journal of the American Ceramic Society, vol.21, issue.1, pp.69-108, 1986.
DOI : 10.1179/030634580790441187

H. J. Lim, J. W. Jung, D. B. Han, and K. T. Kim, A finite element model for asymmetric creep behavior of ceramics, Materials Science and Engineering: A, vol.224, issue.1-2, pp.125-130, 1997.
DOI : 10.1016/S0921-5093(96)10557-8

A. A. Wereszczak, M. K. Ferber, T. P. Kirkland, A. S. Barnes, E. L. Frome et al., Asymmetric tensile and compressive creep deformation of hot-isostatically-pressed Y2O3-doped -Si3N4, Journal of the European Ceramic Society, vol.19, issue.2, pp.227-237, 1999.
DOI : 10.1016/S0955-2219(98)00184-8

J. R. Dryden, On the creep in ceramics due to a viscous grain boundary phase, Journal of the Mechanics and Physics of Solids, vol.48, issue.10, pp.2115-2135, 2000.
DOI : 10.1016/S0022-5096(99)00106-4

R. S. Kottada and A. H. Chokshi, The high temperature tensile and compressive deformation characteristics of magnesia doped alumina, Acta Materialia, vol.48, issue.15, pp.3905-3915, 2000.
DOI : 10.1016/S1359-6454(00)00180-4

E. Blond, N. Schmitt, F. Hild, . Ph, J. Blumenfeld et al., Modelling of high temperature asymmetric creep behavior of ceramics, Journal of the European Ceramic Society, vol.25, issue.11, pp.25-1819, 2005.
DOI : 10.1016/j.jeurceramsoc.2004.06.004

S. I. Warshaw and F. H. Norton, Deformation Behavior of Polycrystalline Aluminum Oxide, Journal of the American Ceramic Society, vol.41, issue.7, pp.479-486, 1962.
DOI : 10.1063/1.1735614

H. Timoshenko, Non-stationary stress distribution in a ceramic bending beam during constant load, Res. Mech, pp.55-71, 1984.

T. J. Chuang, Estimation of power-law creep parameters from bend test data, Journal of Materials Science, vol.1, issue.1, pp.165-175, 1986.
DOI : 10.1007/BF01144716

S. M. Wiederhorn, L. Chuck, E. R. Fuller-jr, and N. J. Tighe, Creep Rupture of Siliconized Silicon Carbide, Material Science Research, Tailoring Multiphase and Composite Ceramics, pp.755-773, 1986.
DOI : 10.1007/978-1-4613-2233-7_58

C. F. Chen and T. J. Chuang, Improved Analysis for Flexural Creep with Application to Sialon Ceramics, Journal of the American Ceramic Society, vol.71, issue.7, pp.73-2366, 1990.
DOI : 10.1016/0001-6160(81)90023-7

M. W. Bird, R. P. Aune, F. Yu, P. F. Becher, and K. W. White, Creep behavior of a zirconium diboride???silicon carbide composite, Journal of the European Ceramic Society, vol.33, issue.13-14, pp.2407-2420, 2013.
DOI : 10.1016/j.jeurceramsoc.2013.03.022

G. Dusserre, F. Nazaret, L. Robert, and T. Cutard, Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests, Journal of the European Ceramic Society, vol.33, issue.2, pp.221-231, 2013.
DOI : 10.1016/j.jeurceramsoc.2012.09.011
URL : https://hal.archives-ouvertes.fr/hal-01687319

P. Leplay, O. Lafforgue, and F. Hild, Analysis of Asymmetrical Creep of a Ceramic at 1350??C by Digital Image Correlation, Journal of the American Ceramic Society, vol.49, issue.4, pp.2240-2247, 2015.
DOI : 10.1016/j.euromechsol.2014.06.001
URL : https://hal.archives-ouvertes.fr/hal-01218666

D. J. Lee and I. Palley, Tensile creep in ceramics using four-point bending test, KSME Journal, vol.69, issue.No. 5, pp.325-331, 1994.
DOI : 10.1111/j.1151-2916.1986.tb04783.x

D. J. Lee, Estimating tensile creep rate of ceramics from flexure data, Journal of the European Ceramic Society, vol.16, issue.12, pp.1377-1383, 1996.
DOI : 10.1016/0955-2219(96)00060-X

A. Y. Peras, The flexural creep of refractory materials, Refractories, vol.48, issue.No. 10, pp.294-297, 1977.
DOI : 10.1007/BF01294081

P. K. Talty and R. A. , Determination of tensile and compressive creep behaviour of ceramic materials from bend tests, Journal of Materials Science, vol.26, issue.3, pp.580-586, 1978.
DOI : 10.1007/BF00541808

P. Leplay, J. Réthoré, S. Meille, and M. Baietto, Identification of asymmetric constitutive laws at high temperature based on Digital Image Correlation, Journal of the European Ceramic Society, vol.32, issue.15, pp.3949-3958, 2012.
DOI : 10.1016/j.jeurceramsoc.2012.03.024
URL : https://hal.archives-ouvertes.fr/hal-00938624

P. Grassl, K. Lundgren, and K. Gylltoft, Concrete in compression: a plasticity theory with a novel hardening law, International Journal of Solids and Structures, vol.39, issue.20, pp.5205-5223, 2002.
DOI : 10.1016/S0020-7683(02)00408-0

D. C. Drucker and W. Prager, Soil mechanics and plastic analysis or limit design, Quarterly of Applied Mathematics, vol.10, issue.2, pp.157-165, 1952.
DOI : 10.1090/qam/48291
URL : http://www.ams.org/qam/1952-10-02/S0033-569X-1952-48291-2/S0033-569X-1952-48291-2.pdf

D. C. Drucker, Concept of path independence and material stability for soils, Proc. IUTAM Symposium on Rheology and Soil Mechanics, pp.23-46, 1964.

J. Jiang and Y. Wu, Identification of material parameters for Drucker???Prager plasticity model for FRP confined circular concrete columns, International Journal of Solids and Structures, vol.49, issue.3-4, pp.445-456, 2012.
DOI : 10.1016/j.ijsolstr.2011.10.002

J. Jiang, Y. Wu, and X. Zhao, Application of Drucker-Prager Plasticity Model for Stress-Strain Modeling of FRP Confined Concrete Columns, Procedia Engineering, vol.14, pp.687-694, 2011.
DOI : 10.1016/j.proeng.2011.07.088

]. G. Arslan, Sensitivity study of the Drucker???Prager modeling parameters in the prediction of the nonlinear response of reinforced concrete structures, Materials & Design, vol.28, issue.10, pp.2596-2603, 2007.
DOI : 10.1016/j.matdes.2006.10.021

O. Valentin, F. Nazaret, G. Dusserre, and T. Cutard, Mechanical engineering creep simulation of ceramic materials with the Drucker-Prager model, pp.19-20, 2012.

S. Jin, H. Harmuth, D. Gruber, and R. Rössler, Influence of creep on the thermomechanical behavior of a rh-snorkel, Proc. of UNITECR, 14th Biennial Wolrdwide Congress on Refractories, 2015.

D. C. Drucker, Relation of experiments to mathematical theories of plasticity, J. Appl. Mech, vol.16, pp.349-359, 1949.

I. Y. Tsvelodub, The Stability Postulate and Its Applications in Creep Theory of Metallic Materials, Institute of Hydrodynamics, 1991.

P. A. Vermeer and R. De-borst, Non-Associated Plasticity for Soils, Concrete and Rock, pp.1-64, 1984.
DOI : 10.1007/978-94-017-2653-5_10
URL : https://repository.tudelft.nl/islandora/object/uuid%3A4ee188ab-8ce0-4df3-adf5-9010ebfaabf0/datastream/OBJ/download

G. Z. Voyiadjis and A. Zolochevsky, Modeling of secondary creep behavior for anisotropic materials with different properties in tension and compression, International Journal of Plasticity, vol.14, issue.10-11, pp.1059-1083, 1998.
DOI : 10.1016/S0749-6419(98)00045-X

A. Zolochevsky and G. Z. Voyiadjis, Theory of creep deformation with kinematic hardening for materials with different properties in tension and compression, International Journal of Plasticity, vol.21, issue.3, pp.435-462, 2005.
DOI : 10.1016/j.ijplas.2003.12.007

A. , Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration, 2009.

H. Marzagui and T. Cutard, Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM, Journal of Materials Processing Technology, vol.155, issue.156, pp.155-156, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.365
URL : https://hal.archives-ouvertes.fr/hal-01796847

F. Nazaret, H. Marzagui, and T. Cutard, Influence of the mechanical behaviour specificities of damaged refractory castables on the Young's modulus determination, Journal of the European Ceramic Society, vol.26, issue.8, pp.1429-1438, 2006.
DOI : 10.1016/j.jeurceramsoc.2005.03.231

G. Dusserre, G. Bernhart, F. M. Schmidt, and G. Dour, Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests, Journal of Non-Newtonian Fluid Mechanics, vol.166, issue.21-22, pp.1229-1238, 2011.
DOI : 10.1016/j.jnnfm.2011.08.001
URL : https://hal.archives-ouvertes.fr/hal-01716273

S. Jin, H. Harmuth, and D. Gruber, Compressive creep testing of refractories at elevated loads???Device, material law and evaluation techniques, Journal of the European Ceramic Society, vol.34, issue.15, pp.4037-4042, 2014.
DOI : 10.1016/j.jeurceramsoc.2014.05.034