M. Kleiner, M. Geiger, and A. Klaus, Manufacturing of lightweight components by metal forming, CIRP Ann Manuf Technol, vol.52, issue.2, pp.521-542, 2003.

M. Kleiner, S. Chatti, and A. Klaus, Metal forming techniques for Friction, J Mater Process Tech, vol.3, issue.1, pp.1-27, 2006.

J. Yanagimoto, K. Oyamada, and T. Nakagawa, Springback of high-strength steel after hot and warm sheet formings, CIRP Ann Manuf Technol, vol.54, issue.1, pp.213-216, 2005.

H. Karbasian and A. E. Tekkaya, A review on hot stamping, J Mater Process Tech, vol.210, issue.15, pp.2103-2118, 2010.

Y. Lin and X. Chen, A critical review of experimental results and constitutive descriptions for metals and alloys in hot working, Mater Design, vol.32, issue.4, pp.1733-1759, 2011.

R. Wagoner, H. Lim, and M. G. Lee, Advanced issues in springback, Int J Plasticity, vol.45, pp.3-20, 2013.

L. Pelcastre, J. Hardell, and B. Prakash, Investigations into the occurrence of galling during hot forming of Al-Si-coated high-strength steel, Part J: J Eng Tribol, vol.225, issue.6, pp.487-498, 2011.

J. Kondratiuk and P. Kuhn, Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming, Wear, vol.270, pp.839-849, 2011.

A. Ghiotti, S. Bruschi, F. Sgarabotto, and P. Bariani, Tribological performances of Zn-based coating in direct hot stamping, Tribol Int, vol.78, pp.142-151, 2014.

A. Tomala, S. Hernandez, M. Rodriguez-ripoll, E. Badisch, and B. Prakash, Tribological performance of some solid lubricants for hot forming through laboratory simulative tests, Tribol Int, vol.74, pp.164-173, 2014.

M. Schütze, Protective Oxide Scale, 1991.

S. Aouadi, H. Gao, A. Martini, T. Scharf, and C. Muratore, Lubricious oxide coatings for extreme temperature applications: A review, Surf Coat Tech, vol.257, pp.266-277, 2014.

A. Erdemir, A crystal-chemical approach to lubrication by solid oxides, Tribol Lett, vol.8, issue.2?3, pp.97-102, 2000.

C. Zhou, H. Ma, and L. Wang, Comparative study of oxidation kinetics for pure nickel oxidized under tensile and compressive stress, Corros Sci, vol.52, issue.1, pp.210-215, 2010.

P. Blau, T. Brummett, and B. A. Pint, Effects of prior surface damage on high-temperature oxidation of fe-, ni-, and co-based alloys, Wear, vol.267, issue.1-4, pp.380-386, 2009.

S. Ilo, A. Tomala, and E. Badisch, Oxidative wear kinetics in unlubricated steel sliding contact, Tribol Int, vol.44, issue.10, pp.1208-1215, 2011.
DOI : 10.1016/j.triboint.2011.05.021

L. Suárez, Y. Houbaert, X. Eynde, and R. Colás, High temperature deformation of oxide scale, Corros Sci, vol.51, issue.2, pp.309-315, 2009.

H. Utsunomiya, S. Doi, K. Hara, T. Sakai, and S. Yanagi, Deformation of oxide scale on steel surface during hot rolling, CIRP Ann Manuf Technol, vol.58, issue.1, pp.271-274, 2009.

D. Wei, J. Huang, A. Zhang, Z. Jiang, A. Tieu et al., The effect of oxide scale of stainless steels on friction and surface roughness in hot rolling, Wear, vol.271, issue.9, pp.2417-2425, 2011.

B. Picqué, P. Bouchard, P. Montmitonnet, and M. Picard, Mechanical behaviour of iron oxide scale: Experimental and numerical study, Wear, vol.260, issue.3, pp.231-242, 2006.

W. Sun, A. Tieu, Z. Jiang, H. Zhu, and C. Lu, Oxide scales growth of low-carbon steel at high temperatures, J Mater Process Tech, 2004.

M. Pellizzari, A. Molinari, and G. Straffelini, Tribological behaviour of hot rolling rolls, Wear, vol.259, pp.1281-1289, 2005.

M. Pellizzari, D. Cescato, and D. Flora, Hot friction and wear behaviour of high speed steel and high chromium iron for rolls, Wear, vol.267, issue.1-4, pp.467-475, 2009.

M. Pellizzari and D. Flora, Influence of laser hardening on the tribological properties of forged steel for hot rolls, Wear, vol.271, issue.9, pp.2402-2411, 2011.

C. Vergne, C. Boher, C. Levaillant, and R. Gras, Analysis of the friction and wear behavior of hot work tool scale: application to the hot rolling process, Wear, vol.250, issue.1?12, pp.322-333, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01717277

O. Joos, C. Boher, C. Vergne, C. Gaspard, T. Nylen et al., Assessment of oxide scales influence on wear damage of HSM work rolls, Wear, vol.263, pp.198-206, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01666711

W. Zamri, A study of the mechanical properties and wear behaviour of the oxide layer formed on high speed steel work rolls, 2013.

V. Panjkovic, Friction and the Hot Rolling of Steel, 2014.

M. Rosso, A. Grande, M. Ugues, and D. , Tooling materials and their applications from research to market, Proceedings of 7th International Tooling Conference, 2006.

R. Matsumoto, Y. Osumi, and H. Utsunomiya, Reduction of friction of steel covered with oxide scale in hot forging, J Mater Process Tech, vol.214, issue.3, pp.651-659, 2014.

N. Garza-montes-de-oca and W. Rainforth, Wear mechanisms experienced by a work roll grade high speed steel under different environmental conditions, Wear, vol.267, issue.1-4, pp.441-448, 2009.

A. Turetta, S. Bruschi, and A. Ghiotti, Investigation of 22MnB5 formability in hot stamping operations, J Mater Process Tech, vol.177, issue.1-3, pp.396-400, 2006.

P. Bariani, S. Bruschi, A. Ghiotti, and A. Turetta, Testing formability in the hot stamping of HSS, CIRP Ann Manuf Technol, vol.57, issue.1, pp.265-268, 2008.

J. Hardell, E. Kassfeldt, and B. Prakash, Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 ° C, Wear, vol.264, issue.9, pp.788-799, 2008.

J. Hardell and B. Prakash, High-temperature friction and wear behaviour of different tool steels during sliding against Al-Si-coated high-strength steel, Tribol Int, vol.41, issue.7, pp.663-671, 2008.

L. Pelcastre, J. Hardell, and B. Prakash, Galling mechanisms during interaction of tool steel and Al-Si coated ultra-high strength steel at elevated temperature, Tribol Int, vol.67, pp.263-271, 2013.

A. Ghiotti, F. Sgarabotto, and S. Bruschi, A novel approach to wear testing in hot stamping of high strength boron steel sheets, Wear, vol.302, pp.1319-1326, 2013.

C. Dessain, P. Hein, J. Wilsius, L. Penazzi, C. Boher et al., Experimental investigation of friction and wear in hot stamping of Usibor 1500P, Proceeding of the 1st International Conference on Hot Sheet Metal Forming of HighPerformance Steel, pp.217-227, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01760291

C. Boher, L. Roux, S. Penazzi, L. Dessain, and C. , Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hot stamping of a high-strength boron steel, Wear, vol.294, pp.286-295, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01687327

L. Roux, S. Boher, C. Penazzi, L. Dessain, C. Tavernier et al., A methodology and new criteria to quantify the adhesive and abrasive wear damage on a die radius using white light profilometry, Tribol Int, vol.52, pp.40-49, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01687328

F. Stott and G. Wood, The influence of oxides on the friction and wear of alloys, Tribol Int, vol.11, issue.4, pp.211-218, 1978.

D. Barnes, J. Wilson, F. Stott, and G. Wood, The influence of oxide films on the friction and wear of fe-5% cr alloy in controlled environments, Wear, vol.45, issue.2, pp.161-176, 1977.

P. Blau, Elevated-temperature tribology of metallic materials, Tribol Int, vol.43, issue.7, pp.1203-1208, 2010.

J. Jiang, F. Stott, and M. M. Stack, A generic model for dry sliding wear of metals at elevated temperatures, Wear, vol.256, issue.9, pp.973-985, 2004.

J. Jiang, F. Stott, and M. Stack, The role of triboparticulates in dry sliding wear, Tribol Int, vol.31, issue.5, pp.245-256, 1998.

I. Inman, P. Datta, H. Du, J. Burnell-gray, S. Pierzgalski et al., Studies of high temperature sliding wear of metallic dissimilar interfaces, Tribol Int, vol.38, issue.9, pp.812-823, 2005.

P. Lepesant, C. Boher, Y. Berthier, and F. Rézai-aria, A phenomenological model of the third body particles circulation in a high temperature contact, Wear, vol.298, pp.66-79, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00861326

P. Wood, H. Evans, and C. B. Ponton, Investigation into the wear behaviour of tribaloy 400 ° C during rotation as an unlubricated bearing at 600 ° C, Wear, vol.269, pp.763-769, 2010.

J. Sjöström and J. Bergström, Thermal fatigue testing of chromium martensitic hot-work tool steel after different austenitizing treatments, J Mater Process Tech, 2004.

A. Persson, S. Hogmark, and J. Bergström, Thermal fatigue cracking of surface engineered hot work tool steels, Surf Coat Tech, vol.191, issue.2-3, pp.216-227, 2005.

K. Tsubouchi, M. Akiyama, M. Tsumura, and S. Amano, Development of a wear-resistant surface layer for a tool to be used for high-temperature stainless steel rolling, Part J: J Eng Tribol, vol.213, issue.6, pp.473-480, 1999.

B. Podgornik and S. Hogmark, Surface modification to improve friction and galling properties of forming tools, J Mater Process Tech, vol.174, issue.1-3, pp.334-341, 2006.

R. Rodríguez-baracaldo, J. Benito, E. Puchi-cabrera, and M. H. Staia, High temperature wear resistance of (TiAl)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments, Wear, vol.262, issue.3?4, pp.380-389, 2007.

A. E. Özgür, B. Yalç?n, and M. Koru, Investigation of the wear performance and thermal diffusivity properties of M41 tools steel coated with various film coatings, Mater Design, vol.30, issue.2, pp.414-417, 2009.

T. Polcar, R. Martinez, T. Vít?, L. Kopecký, R. Rodriguez et al., High temperature tribology of CrN and multilayered Cr/CrN coatings, Surf Coat Tech, vol.203, pp.3254-3259, 2009.

J. Hardell and B. Prakash, Tribological performance of surface engineered tool steel at elevated temperatures, Int J Refract Met H Mater, vol.28, pp.106-114, 2010.

L. Li, D. Peng, J. Liu, and Z. Liu, An experiment study of the lubrication behavior of graphite in hot compression tests of Ti-6Al-4V alloy, J Mater Process Tech, vol.112, issue.1, pp.1-5, 2001.

R. Matsumoto and K. Osakada, Lubrication and friction of magnesium alloys in warm forging, CIRP Ann Manuf Technol, vol.51, issue.1, pp.223-226, 2002.

E. Daouben, A. Dubois, M. Dubar, L. Dubar, R. Deltombe et al., Effects of lubricant and lubrication parameters on friction during hot steel forging, Int J Mater Form, vol.1, issue.1, pp.1223-1226, 2008.

B. Buchner, G. Maderthoner, and B. Buchmayr, Characterisation of different lubricants concerning the friction coefficient in forging of AA2618, J Mater Process Tech, vol.198, pp.41-47, 2008.

A. Yanagida and A. Azushima, Evaluation of coefficients of friction in hot stamping by hot flat drawing test, CIRP Ann Manuf Technol, vol.58, issue.1, pp.247-250, 2009.

N. Kawai and K. Dohda, Problems in the weldability test, Journal of JSTP, vol.24, pp.137-146, 1983.

K. Dohda, Friction test method for plastic forming, Journal of JSTP, vol.34, pp.1091-1099, 1993.

K. Dohda and Z. G. Wang, Current status and future trend of tribo-simulator for sheet metal forming, Journal, vol.3, issue.1, pp.1-27, 1998.

K. Dohda and T. Makino, Tribology in micro/meso-scale forming, Journal of JSTP, vol.49, pp.638-642, 2008.

P. Munther and J. Lenard, Tribology during hot, flat rolling of steels, CIRP Ann Manuf Technol, vol.44, issue.1, pp.213-216, 1995.

J. Beynon, Tribology of hot metal forming, Tribol Int, vol.31, issue.1?3, pp.73-77, 1998.

P. Groche and T. Callies, Tribology in sheet metal forming with regard to challenges in lightweight construction, Adv Mat Res, vol.6, pp.93-100, 2005.

K. Mori, T. Maeno, and S. Fuzisaka, Punching of ultra-high strength steel sheets using local resistance heating of shearing zone, J Mater Process Tech, vol.212, issue.2, pp.534-540, 2012.

P. Groche, C. Müller, J. Stahlmann, and S. Zang, Mechanical conditions in bulk metal forming tribometers-Part one, Tribol Int, vol.62, pp.223-231, 2012.

P. Groche, J. Stahlmann, and C. Müller, Mechanical conditions in bulk metal forming tribometers-Part two, Tribol Int, vol.66, pp.345-351, 2013.

, Standard test method for wear testing with a pin-on-disk apparatus, ASTM Standard G99, 2010.

M. Marzouki, C. Kowandy, and C. Richard, Experimental simulation of tool/product interface during hot drawing, Wear, vol.262, pp.235-241, 2007.
URL : https://hal.archives-ouvertes.fr/hal-02009918

A. Ghiotti, S. Bruschi, and F. Borsetto, Tribological characteristics of high strength steel sheets under hot stamping conditions, J Mater Process Tech, vol.211, issue.11, 2011.

H. Zhu, Q. Zhu, A. Tieu, B. Kosasih, and C. Kong, A simulation of wear behaviour of high-speed steel hot rolls by means of high temperature pin-on-disc tests, Wear, vol.302, issue.1-2, pp.1310-1318, 2013.

M. Hanna, Tribological evaluation of aluminum and magnesium sheet forming at high temperatures, Wear, vol.267, issue.5?8, 2009.

A. Yanagida, T. Kurihara, and A. Azushima, Development of tribo-simulator for hot stamping, J Mater Process Tech, vol.210, issue.3, pp.456-460, 2010.

K. Dohda, T. Makino, and H. Katoh, Tribo-characteristic of coated die against magnesium in ironing process, Int J Mater Form, vol.2, pp.243-246, 2009.

O. Gali, A. Riahi, and A. Alpas, The tribological behaviour of AA5083 alloy plastically deformed at warm forming temperatures, Wear, vol.302, pp.1257-1267, 2013.

M. Geiger, M. Merklein, and J. Lechler, Determination of tribological conditions within hot stamping, Prod Engineer, vol.2, issue.3, pp.269-276, 2008.

E. Ceron, N. Bay, T. Aida, and K. Dohda, Simulative testing of friction and lubrication in cold forging of steel and aluminum, NAMRC 40?North American Manufacturing Research Conference, pp.287-296, 2012.

L. Wang, J. Zhou, J. Duszczyk, and L. Katgerman, Friction in aluminium extrusion-Part 1: A review of friction testing techniques for aluminium extrusion, Tribol Int, vol.56, pp.89-98, 2012.

, Standard test method for linearly reciprocating ball-on-flat sliding wear, ASTM Standard G133, 2010.

L. Wang, Y. He, J. Zhou, and J. Duszczyk, Effect of temperature on the frictional behaviour of an aluminium alloy sliding against steel during ball-on-disc tests, Tribol Int, vol.43, issue.1-2, pp.299-306, 2010.

M. Pellizzari, High temperature wear and friction behaviour of nitrided, PVD-duplex and CVD coated tool steel against 6082 Al alloy, Wear, vol.271, issue.9, pp.2089-2099, 2011.

T. Björk, J. Bergström, and S. Hogmark, Tribological simulation of aluminium hot extrusion, Wear, vol.224, issue.2, pp.216-225, 1999.

M. Peterson, S. Calabrese, L. Shizhuo, and X. Jiang, Friction of alloys at high temperature, Mater. Sci. Tech, vol.10, issue.5, pp.313-320, 1994.

P. Mosaddegh, J. Ziegert, W. Iqbal, and Y. Tohme, Apparatus for high temperature friction measurement, Precision Eng, vol.35, issue.3, pp.473-483, 2011.

H. Saiki, Z. Zhan, Y. Marumo, L. Ruan, T. Morooka et al., Evaluation of contact conditions in hot forging of pure aluminum using ultrasonic examination, Mater. Process. Technol, vol.177, issue.1-3, pp.243-246, 2006.

S. Iida and Y. Hidaka, Influence of the iron oxide layer on lubricating properties in seamless pipe hot rolling, Tetsuto-Hagane, vol.94, pp.244-250, 2008.