H. Y. Zhang, S. H. Zhang, M. Cheng, and Z. X. Li, Deformation characteristics of phase in the delta-processed Inconel 718 alloy, Mater. Charact, vol.61, issue.1, pp.49-53, 2010.

M. Anderson, R. Patwa, and Y. C. Shin, Laser-assisted machining of Inconel 718 with an economic analysis, Int. J. Mach. Tools Manuf, vol.46, issue.14, pp.1879-1891, 2006.

K. H. Song and K. Nakata, Microstructural and mechanical properties of friction-stirwelded and post-heat-treated Inconel 718 alloy, J. Alloy. Compd, vol.505, issue.1, pp.144-150, 2010.

J. R. Davis, C. Nickel, and T. Alloys, , 2000.

T. M. Pollock and S. Tin, Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties, J. Propuls. Power, vol.22, issue.2, pp.361-374, 2006.

H. Attia, S. Tavakoli, R. Vargas, and V. Thomson, Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions, CIRP Ann, vol.59, issue.1, pp.83-88, 2010.

J. P. Costes, Y. Guillet, G. Poulachon, and M. Dessoly, Tool-life and wear mechanisms of CBN tools in machining of Inconel 718, Int. J. Mach. Tools Manuf, vol.47, issue.7, pp.1081-1087, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01088213

J. E. Blanther, Manufacture of contour relief-maps, classification cooperative G09B29/12, p.1892

C. W. Hull, Apparatus for production of three-dimensional objects by stereolithography, 1986.

E. Brandl, U. Heckenberger, V. Holzinger, and D. Buchbinder, Additive manufactured AlSi10mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior, Mater. Des, vol.34, pp.159-169, 2012.
DOI : 10.1016/j.matdes.2011.07.067

X. Gong, X. Wang, V. Cole, Z. Jones, K. Cooper et al., Characterization of Microstructure and Mechanical Property of Inconel 718 From Selective Laser Melting, 2015.

E. Chlebus, K. Gruber, B. Kuznicka, J. Kurzac, and T. Kurzynowski, Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting, Mater. Sci. Eng.: A, vol.639, pp.647-655, 2015.

Y. Lu, S. Wu, Y. Gan, T. Huang, C. Yang et al., Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy, Opt. Laser Technol, vol.75, pp.197-206, 2015.
DOI : 10.1016/j.optlastec.2015.07.009

B. Vrancken, L. Thijs, J. Kruth, and J. Van-humbeeck, Heat treatment of Ti6al4v produced by Selective Laser Melting: microstructure and mechanical properties, J. Alloy. Compd, vol.541, pp.177-185, 2012.
DOI : 10.1016/j.jallcom.2012.07.022

K. N. Amato, S. M. Gaytan, L. E. Murr, E. Martinez, P. W. Shindo et al., Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting, Acta Mater, vol.60, issue.5, pp.2229-2239, 2012.
DOI : 10.1016/j.actamat.2011.12.032

Z. Wang, K. Guan, M. Gao, X. Li, X. Chen et al., The microstructure and mechanical properties of deposited-IN718 by selective laser melting, J. Alloy. Compd, vol.513, pp.518-523, 2012.
DOI : 10.1016/j.jallcom.2011.10.107

G. Strano, L. Hao, R. M. Everson, and K. E. Evans, Surface roughness analysis, modelling and prediction in selective laser melting, J. Mater. Process. Technol, vol.213, issue.4, pp.589-597, 2013.
DOI : 10.1016/j.jmatprotec.2012.11.011

W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinoz et al., Hot isostatic pressing of IN718 components manufactured by selective laser melting, Addit. Manuf, vol.13, pp.93-102, 2017.
DOI : 10.1016/j.addma.2016.11.006

P. L. Blackwell, The mechanical and microstructural characteristics of laser-deposited IN718, J. Mater. Process. Technol, vol.170, issue.1, pp.240-246, 2005.
DOI : 10.1016/j.jmatprotec.2005.05.005

T. Trosch, J. Strossner, R. Volkl, and U. Glatzel, Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting, Mater. Lett, vol.164, pp.428-431, 2016.
DOI : 10.1016/j.matlet.2015.10.136

P. Hanzl, M. Zetek, T. Baksa, and T. Kroupa, The influence of processing parameters on the mechanical properties of SLM parts, Procedia Eng. 100 (Suppl. C) (2015) S1405-S1413

D. Gu and Y. Shen, Processing conditions and microstructural features of porous 316l stainless steel components by DMLS, Appl. Surf. Sci, vol.255, issue.5, pp.1880-1887, 2008.
DOI : 10.1016/j.apsusc.2008.06.118

V. K. Balla, J. Soderlind, S. Bose, and A. Bandyopadhyay, Microstructure, mechanical and wear properties of laser surface melted Ti6al4v alloy, J. Mech. Behav. Biomed. Mater, vol.32, pp.335-344, 2014.
DOI : 10.1016/j.jmbbm.2013.12.001

M. Turker, D. Godlinski, and F. Petzoldt, Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing, Mater. Charact, vol.59, issue.12, pp.1728-1735, 2008.

V. S. Sufiiarov, E. V. Borisov, and I. A. Polozov, Selective Laser Melting of the Inconel 718 nickel superalloy, Appl. Mech. Mater, vol.698, pp.333-338, 2015.
DOI : 10.4028/www.scientific.net/amm.698.333

D. Gu and Y. Shen, Effects of processing parameters on consolidation and microstructure of w-cu components by DMLS, J. Alloy. Compd, vol.473, issue.1-2, pp.107-115, 2009.

A. Simchi and H. Pohl, Effects of laser sintering processing parameters on the microstructure and densification of iron powder, Mater. Sci. Eng.: A, vol.359, issue.1-2, pp.341-342, 2003.

L. Thijs, F. Verhaeghe, T. Craeghs, J. V. Humbeeck, and J. Kruth, A study of the microstructural evolution during selective laser melting of ti6al4v, Acta Mater, vol.58, issue.9, pp.3303-3312, 2010.

M. Sadowski, L. Ladani, W. Brindley, and J. Romano, Optimizing quality of additively manufactured Inconel 718 using powder bed laser melting process, Addit. Manuf, vol.11, 2016.

Q. Jia and D. Gu, Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties, J. Alloy. Compd, vol.585, pp.713-721, 2014.

D. Zhang, W. Niu, X. Cao, and Z. Liu, Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy, Mater. Sci. Eng.: A, vol.644, pp.32-40, 2015.

T. Vilaro, C. Colin, J. D. Bartout, L. Nazé, and M. Sennour, Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy, Mater. Sci. Eng.: A, vol.534, pp.446-451, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00675998

A. Mostafa, I. Picazo-rubio, V. Brailovski, M. Jahazi, and M. Medraj, Structure, texture and phases in 3d printed IN718 alloy subjected to homogenization and HIP treatments, Metals, vol.7, issue.6, p.196, 2017.

M. Jambor, O. Bokuvka, F. Novy, L. Trsko, and J. Belan, Phase transformations in nickel base superalloy INCONEL 718 during cyclic loading at high temperature, Prod. Eng. Arch, vol.15, pp.15-18, 2017.

B. Max, Comportement mecanique et couplage mecanique-oxydation dans l?alliage 718: effet des elements en solution solide, 2014.

B. Ter-ovanessian, Etude comparative de differents superalliages base Ni pour ressorts de systemes de maintien, 2011.

M. J. Donachie and S. J. Donachie, Superalloys: A Technical Guide, 2002.

M. Sundararaman, P. Mukhopadhyay, and S. Banerjie, Carbide precipitation in nickel base superalloys and their effect on mechanical properties, Proceedings of Superalloys 718, 625, 706 and Various Derivatives, p.367, 1997.

C. T. Sims, N. S. Stoloff, and W. C. Hagel, Superalloys II: High-temperature Materials for Aerospace and Industrial Power, 1987.

D. Keiser and H. Brown, Review of the physical metallurgy of Alloy 718

M. Ni, C. Chen, X. Wang, P. Wang, R. Li et al., Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing, Mater. Sci. Eng.: A, vol.701, pp.344-351, 2017.

C. Home|special-metals,