J. G. Funk and J. W. Deaton, The Interlaminar Fracture Toughness of Woven Graphite/Epoxy Composites, 1989.

J. Kim and M. Sham, Impact and delamination failure of woven-fabric composites, Composites Science and Technology, vol.60, issue.5, pp.166-175, 2000.

N. K. Naik, Y. C. Sekher, and S. Meduri, Damage in woven-fabric composites subjected to low-velocity impact, Composites Science and Technology, vol.60, issue.5, pp.731-744, 2000.

S. V. Lomov, D. S. Ivanov, T. C. Truong, I. Verpoest, F. Baudry et al., Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test, Composites Science and Technology, vol.68, issue.12, pp.2340-2349, 2008.

A. R. Melro, Analytical and numerical modelling of damage and fracture of advanced composites, 2011.

S. Daggumati, E. Voet, W. Van-paepegem, J. Degrieck, J. Xu et al., Local strain in a 5-harness satin weave composite under static tension: Part I-Experimental analysis, Composites Science and Technology, vol.71, issue.8, pp.1171-1179, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00753179

G. Nilakantan, M. Keefe, E. D. Wetzel, T. A. Bogetti, and J. W. Gillespie, Effect of statistical yarn tensile strength on the probabilistic impact response of woven fabrics, Composites Science and Technology, vol.72, issue.2, pp.320-329, 2012.

N. K. Naik, P. Shrirao, and B. C. Reddy, Ballistic impact behaviour of woven fabric composites: Formulation, International Journal of Impact Engineering, vol.32, issue.9, pp.1521-1552, 2006.

G. Reyes and U. Sharma, Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact, Composite Structures, vol.92, issue.2, pp.523-531, 2010.

L. Iannucci and M. L. Willows, An energy based damage mechanics approach to modelling impact onto woven composite materialsPart I: Numerical models, Composites Part A: Applied Science and Manufacturing, vol.37, issue.11, pp.2041-2056, 2006.

L. Iannucci and M. L. Willows, An energy based damage mechanics approach to modelling impact onto woven composite materials: Part II. Experimental and numerical results, Composites Part A: Applied Science and Manufacturing, vol.38, issue.2, pp.540-554, 2007.

O. Cousigné, D. Moncayo, D. Coutellier, P. Camanho, and H. Naceur, Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations, Composite Structures, vol.115, pp.75-88, 2014.

S. Daggumati, W. Van-paepegem, J. Degrieck, J. Xu, and S. V. ,

I. Lomov and . Verpoest, Local damage in a 5-harness satin weave composite under static tension: Part II-Meso-FE modelling, Composites Science and Technology, vol.70, issue.13, pp.1934-1941, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00681633

A. R. Melro, P. P. Camanho, F. M. Andrade-pires, and S. T. Pinho, Numerical simulation of the non-linear deformation of 5-harness satin weaves, Computational Materials Science, vol.61, pp.116-126, 2012.

E. Obert, F. Daghia, P. Ladevèze, and L. Ballere, Micro and meso modeling of woven composites: Transverse cracking kinetics and homogenization, Composite Structures, vol.117, pp.212-221, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01581253

M. Zako, Y. Uetsuji, and T. Kurashiki, Finite element analysis of damaged woven fabric composite materials, Composites Science and Technology, vol.63, issue.34, pp.507-516, 2003.

P. Boisse, B. Zouari, and A. Gasser, A mesoscopic approach for the simulation of woven fibre composite forming, Composites Science and Technology, vol.65, issue.34, pp.429-436, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00020532

E. M. Parsons, T. Weerasooriya, S. Sarva, and S. Socrate, Impact of woven fabric: Experiments and mesostructure-based continuum-level simulations, Journal of the Mechanics and Physics of Solids, vol.58, issue.11, pp.1995-2021, 2010.

H. E. Johnson, L. A. Louca, S. Mouring, and A. S. Fallah, Modelling impact damage in marine composite panels, International Journal of Impact Engineering, vol.36, issue.1, pp.25-39, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00545294

P. Navarro, J. Aubry, S. Marguet, J. F. Ferrero, S. Lemaire et al., Semi-continuous approach for the modeling of thin woven composite panels applied to oblique impacts on helicopter blades, Composites Part A: Applied Science and Manufacturing, vol.43, issue.6, pp.871-879, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02143837

P. Navarro, J. Aubry, S. Marguet, J. F. Ferrero, S. Lemaire et al., Experimental and numerical study of oblique impact on woven composite sandwich structure: Influence of the firing axis orientation, Composite Structures, vol.94, issue.6, pp.1967-1972, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01878136

F. Pascal, P. Navarro, S. Marguet, and J. Ferrero, On the modelling of low to medium velocity impact onto woven composite materials with a 2d semi-continuous approach, Composite Structures, vol.134, pp.302-310, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01878084

J. Batoz and G. Dhatt, Modélisation des structures parélémentsparéléments finis: Coques, hermes Edition, vol.3, 1992.

G. A. Davies, D. Hitchings, and J. Ankersen, Predicting delamination and debonding in modern aerospace composite structures, Composites Science and Technology, vol.66, issue.6, pp.846-854, 2006.

F. Aymerich, F. Dore, and P. Priolo, Simulation of multiple delaminations in impacted cross-ply laminates using a finite element model based on cohesive interface elements, Composites Science and Technology, vol.69, issue.1112, pp.1699-1709, 2009.

S. Bianchi, A. Corigliano, R. Frassine, and M. Rink, Modelling of interlaminar fracture processes in composites using interface elements, Composites Science and Technology, vol.66, issue.2, pp.255-263, 2006.

P. Ladevèze, O. Allix, J. Deü, and D. Lévêque, A mesomodel for localisation and damage computation in laminates, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.12, pp.105-122, 2000.