H. Ashrafi, M. Shamanian, R. Emadi, and N. Saeidi, A novel and simple technique for development of dual phase steels with excellent ductility, Mater. Sci. Eng, vol.680, 2017.

H. A. Barnes, J. F. Hutton, and K. Walters, An Introduction to Rheology, 1998.

J. C. Baudez, P. Coussot, and F. Thirion, Rheology of sludge of Wastewater Treatment Plant: Preliminary studies for mastering of storage and spreading. (in French, Rh eologie Des Boues de Stations D' epuration : etudes Pr eliminaires Pour La Maîtrise Des Stockages et epandages, 1998.

C. Charlou, Characterization and modelling of sewage sludge flow in paddle dryer (in French, Caract erisation et mod elisation de l' ecoulement des boues r esiduaires dans un s echeur a palettes, 2014.

R. P. Chhabra and J. F. Richardson, Non-newtonian Flow and Applied Rheology: Engineering Applications. Butterworth-Heinemann, 2011.

I. Costa and J. Banos, Tensile creep of a structural epoxy adhesive: experimental and analytical characterization, Int. J. Adhesion Adhes, vol.59, pp.115-124, 2015.

P. Coussot, Yield stress fluid flows: a review of experimental data, J. NonNewtonian Fluid Mech, vol.211, pp.31-49, 2014.

P. Coussot, Mudflow Rheology and Dynamics, 1997.

R. S. Devi, G. Poshal, K. E. Prasad, and R. R. Goud, Strain hardening behaviour of hot rolled annealed nickel free nitrogen based austenitic stainess steel, Mater. Today: Proc, vol.4, pp.917-926, 2016.

N. Ercan, A. Durmus, and A. Kasgoz, Comparing of melt blending and solution mixing methods on the physical properties of thermoplastic polyurethane/ organoclay nanocomposite films, J. Thermoplast. Compos. Mater, vol.30, pp.950-970, 2017.

N. Eshtiaghi, F. Markis, S. Dong-yap, J. C. Baudez, and P. Slatter, Rheological characterisation of municipal sludge: a review, Water Res, vol.47, issue.15, pp.5493-5510, 2013.

. Eurostat, Sewage sludge production and disposal from urban wastewater, 2018.

J. Jiang, J. Wu, S. Poncin, and H. Li, Rheological characteristics of highly concentrated anaerobic digested sludge, Biochem. Eng. J, vol.86, pp.57-61, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01275413

Y. Z. Jiang, R. H. Wang, and J. B. Zhu, Rheological mechanical properties of alteredrock, Mater. Res. Innovat, vol.19, pp.349-355, 2015.

F. Liang, M. Sauceau, G. Dusserre, and P. Arlabosse, A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge, Water Res, vol.113, pp.171-180, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01619250

F. Liang, X. Chen, H. Mao, M. Sauceau, P. Arlabosse et al., The microstructure: a critical factor in characterising the sticky properties of highly concentrated sewage sludge, 6th International Conference on Engineering for Waste and Biomass Valorisation, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01700827

Y. M. Lin, P. K. Sharma, and M. C. Van-loosdrecht, The chemical and mechanical differences between alginate-like exopolysaccharides isolated from aerobic flocculent sludge and aerobic granular sludge, Water Res, vol.47, issue.1, pp.57-65, 2013.

V. Lotito and A. M. Lotito, Rheological measurements on different types of sewage sludge for pumping design, Elements of Technical Mechanics, vol.137, 1909.

A. Y. Malkin and A. I. Isayev, Rheology Concepts, Methods & Application, 2006.

M. Meerts, R. Cardinaels, F. Oosterlinck, C. M. Courtin, and P. Moldenaers, The interplay between the main flour constituents in the rheological behaviour of wheat flour dough, Food Bioprocess Technol, vol.10, pp.249-265, 2017.

R. Moreira, F. Chenlo, S. Arufe, and S. N. Rubinos, Physicochemical characterization of white, yellow and purple maize flours and rheological characterization of their doughs, J. Food Sci. Technol, vol.52, pp.7954-7963, 2015.

M. Mori, J. Isaac, I. Seyssiecq, and N. Roche, Effect of measuring geometries and of exocellular polymeric substances on the rheological behaviour of sewage sludge, Chem. Eng. Res. Design, vol.86, issue.6, 2008.

M. Mori, I. Seyssiecq, and N. Roche, Rheological measurements of sewage sludge for various solids concentrations and geometry, Process Biochem, vol.41, issue.7, pp.1656-1662, 2006.

F. A. Morrison, Understanding Rheology of Dispersions, 2001.

N. Ratkovich, W. Horn, F. P. Helmus, S. Rosenberger, W. Naessens et al., Activated sludge rheology: a critical review on data collection and modelling, Water Res, vol.47, issue.2, pp.463-482, 2013.
DOI : 10.1016/j.watres.2012.11.021

I. Seyssiecq, J. H. Ferrasse, and N. Roche, State-of-the-Art: rheological characterisation of wastewater treatment sludge, Biochem. Eng. J, vol.16, issue.1, pp.41-56, 2003.

V. Shiva, S. Goyal, R. Sandhya, K. Laha, and A. K. Bhaduri, Flow behaviour of modified 9Cr-1Mo steel at elevated temperatures, Trans. Indian Inst. Met, vol.70, issue.3, pp.589-596, 2017.
DOI : 10.1007/s12666-017-1047-4

T. Tadros, Rheology of Dispersions, 2010.

R. I. Tanner and K. Walters, Rheology: an Historical of Perspective, 1998.

J. Yu, P. H. Santos, and O. H. Campanella, A study to characterize the mechanical behavior of semisolid viscoelastic systems under compression chewing e case study of agar gel, J. Texture Stud, vol.43, issue.6, pp.459-467, 2012.

C. Zhang, P. Cao, C. Pu, J. Liu, and P. Wen, Integrated identification method of rheological model of sandstone in sanmenxia bauxite, Trans. Nonferrous Metals Soc. China, vol.24, issue.6, pp.1859-1865, 2014.

J. Zhang, Y. Xue, N. Eshtiaghi, X. Dai, W. Tao et al., Evaluation of thermal hydrolysis efficiency of mechanically dewatered sewage sludge via rheological measurement, Water Res, vol.116, pp.34-43, 2017.