Influence of parameters controlling the extrusion step in fused filament fabrication (FFF) process applied to polymers using numerical simulation

Shahriar Bakrani Balani (1) , Arthur Cantarel (2) , France Chabert (1) , Valérie Nassiet (1)

1 LGP - Laboratoire Génie de Production
2 ICA - Institut Clément Ader

Extrusion is one of the oldest manufacturing processes; it is widely used for manufacturing finished and semi- finished products. Moreover, extrusion is also the main process in additive manufacturing technologies such as Fused Filament Fabrication (FFF). In FFF process, the parts are manufactured layer by layer using thermoplastic material. The latter in form of filament, is melted in the liquefier and then it is extruded and deposited on the previous layer. The mechanical properties of the printed parts rely on the coalescence of each extrudate with another one. The coalescence phenomenon is driven by the flow properties of the melted polymer when it comes out the nozzle just before the deposition step. This study aims to master the quality of the printed parts by controlling the effect of the parameters of the extruder on the flow properties in the FFF process. In the current study, numerical simulation of the polymer coming out of the extruder was carried out using Computational Fluid Dynamics (CFD) and two phase flow (TPF) simulation Level Set (LS) method by 2D axisymmetric module of COMSOL Multiphysics software. In order to pair the heat transfer with the flow simulation, an advection-diffusion equation was used. Advection-diffusion equation was implemented as a Partial Differential Equation (PDE) in the software. In order to define the variation of viscosity of the polymer with temperature, the rheological behaviors of two thermoplastics were measured by extensional rheometer and using a parallel-plate configuration of an oscillatory rheometer. The results highlight the influence of the environment temperature and the cooling rate on the temperature and viscosity of the extrudate exiting from the nozzle. Moreover, the temperature and its corresponding viscosity at different times have been determined using numerical simulation. At highest shear rates, the extrudate undergoes deformation from typical cylindrical shape. These results are required to predict the coalescence of filaments, a step towards understanding the mechanical properties of the printed parts.

Mots clés: Additive manufacturing; Thermoplastics; Numerical simulation; Rheology; Thermal transfer

Domaines: Modélisation et simulation; Mécanique des matériaux [physics.class-ph]

Shahriar Bakrani Balani, Arthur Cantarel, France Chabert, Valérie Nassiet. Influence of parameters controlling the extrusion step in fused filament fabrication (FFF) process applied to polymers using numerical simulation. ESAFORM 2018, Apr 2018, Palermo, Italy. pp.140003-1-140003-6, ⟨10.1063/1.5034995⟩. ⟨hal-01905427⟩