S. Audion, G. Khelifati, J. Delfosse, P. Oillic, and R. Peraldi, Extending the use of titanium alloys on A350XWB, Proceedings of the 12th World Conference on Titanium, 2012.

M. Peters, C. H. Kumpfert, C. Ward, and . Leyens, Titanium alloys for aerospace applications, Adv. Eng. Mater, vol.5, issue.6, pp.419-427, 2003.
DOI : 10.1002/3527602119.ch13

R. R. Boyer, An overview on the use of titanium in the aerospace industry, Mater. Sei. Eng. A, vol.213, issue.1-2, pp.103-114, 1996.

R. R. Boyer and R. D. Briggs, The use of p titanium alloys in the aerospace industry, J. Mater. Eng. Perform, vol.14, issue.6, pp.681-685, 2005.

O. M. Ivasishin, P. E. Markovsky, Y. V. Matviychuk, S. Semiatin, C. H. Ward et al., A comparative study of the mechanical properties of high-strength P­ titanium alloys, J. Alloys. Compd, vol.457, issue.1-2, pp.296-309, 2008.

F. Bruneseaux, situ characterizations of phase transformations ki­ netics in the Til 7 titanium alloy by electrical resistivity and high temperature synchrotron X-ray diffraction, vol.476, pp.60-68, 2008.

M. Salib, J. Teixeira, E. Germain, N. Lamielle, E. Gey et al., Influence of transformation temperature on microtexture formation associated with a precipitation at P grain boundaries in a P metastable titanium alloy, Acta Mater, vol.61, issue.10, pp.3758-3768, 2013.

O. M. Ivasishin, P. E. Markovsky, S. Semiatin, and C. H. Ward, Aging response of coarse-and fine-grained p titanium alloys, Mater. Sei. Eng. A, vol.405, issue.1-2, pp.296-305, 2005.

R. Sanguinetti, M. Zandona, A. Pianelli, and E. Gautier, Decomposition of P-meta­ stable Phase in P-Cez alloy during continuous heating, j. Phys. lV, vol.3, issue.C7, pp.527-531, 1993.

F. Prima, P. Vermaut, D. Anse, !. , and J. , Debuigne, w precipitation in a beta meta­ stable titanium alloy, resistometric study, Mater. Trans, vol.41, issue.8, pp.1092-1097, 2000.

F. Bruneseaux, G. Geandier, E. Gautier, M. Dehmas, and P. Boulet, In situ charac­ terization of the transformation sequences of Til 7 alloy by high energy X-ray Diffraction. Influence of the thermal path, Proceedings of the 11 th World Conference on Titanium, 2007.

A. Settefrati, Precipitation in a near beta titanium alloy on ageing: in­ fluence of heating rate and chemical composition of the beta-metastable phase, Sol-Sol Ph. Transform. Inorg. Mater, pp.760-765, 2011.

N. G. Jones, R. J. Dashwood, M. Jackson, and D. Dye, Phase decomposition in Ti-5Al-5Mo-5V-3Cr, Acta Mater, vol.57, issue.13, pp.3830-3839, 2009.

P. Barriobero-vila, G. Requena, S. Schwarz, F. Warchomicka, and T. Buslaps, In­ fluence of phase transformation kinetics on the formation of a in a P­ quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy, Acta Mater, vol.95, pp.90-101, 2015.

H. Chang, E. A. Gautier, and . Zhou, Phase transformation kinetics in metastable titanium alloys, vol.59, pp.1773-1777, 2014.
DOI : 10.1007/s11434-014-0210-0

M. Bônisch, Giant thermal expansion and a-precipitation pathways in Ti-alloys, Nat. Commun, vol.8, p.1429, 2017.

E. Aeby-gautier, B. Denand, M. Teixeira, B. Dehmas, A. Appolaire et al., Influence of microstructure on tensile properties of 13-metastable Ti 17 alloy, Proceedings of the 12th World Conference on Titanium, vol.2, pp.1191-1195, 2011.

A. Settefrati, Étude expérimentale et modélisation par champ de phase de la formation de a dans les alliages de titane P-métastable, 2012.

T. Duval, Analyse multi-échelles des relations microstructure/propriétés mécaniques sous sollicitation monotone et cyclique des alliages de titane P­ métastable, 2013.

T. Duval, P. Villechaise, and S. Andrieu, Mechanical properties and strain mecha­ nisms analysis in Ti-5553 titanium alloys, TMS2011 Suppl, Proc, vol.3, pp.471-478, 2011.

E. Lebrun, P. Svec, Y. Millet, S. Andrieu, and F. Prima, Investigation of a phase precipitation mode during ageing treatment in Ti-18 alloy, Proceedings of the 13th World Conference on Titanium, 2016.

E. Laude, E. Gautier, P. Archambault, and S. Denis, Effects of thermomechanical treatments on the transformation kinetics of titanium alloys. Experimental study and numerical calculation, Rev. De Metall. CIT/Sci. et Génie des Matér, vol.93, issue.9, pp.1067-1078, 1996.

P. Archambault and D. Godard, High temperature precipitation kinetics and TIT curve of a 7xxx alloy by in-situ electrical resistivity measurements and dif­ ferential calorimetry, Scripta Mater, vol.42, issue.7, pp.675-680, 2000.

G. Geandier, E. Aeby-gautier, A. Settefrati, M. Dehmas, and B. Appolaire, Study of diffusive transformations by high energy X-ray diffraction, Compt. Rendus Phys, vol.13, issue.3, pp.257-267, 2012.

H. M. Rietveld, A profile refinement method for nuclear and magnetic struc­ tures, j. Appl. Crystallogr, vol.2, issue.2, pp.65-71, 1969.

J. Rodrîguez, Recent advances in magnetic structure determination by neutron powder diffraction, Phys. B Condens. Matter, vol.192, issue.1-2, pp.55-69, 1993.

A. P. Hammersley, S. O. Svensson, and A. Thompson, Calibration and correction of spatial distortions in 2D detector systems, Nue!. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, vol.346, issue.1, pp.312-321, 1994.

M. Coster and J. Chermant, Précis D'analyse D'images, 1985.

, ADCIS Products: AphelionTM Dev

J. D. Teixeira, B. Appolaire, E. Aeby-gautier, S. Denis, G. Cailletaud et al., Transformation kinetics and microstructures of Til 7 titanium alloy during continuous cooling, vol.448, pp.135-145, 2007.

H. Sharma, S. M. Van-bohemen, R. H. Petrov, and J. Sietsma, Three-dimensional analysis of microstructures in titanium, Acta Mater, vol.58, issue.7, pp.2399-2407, 2010.

, Thermodynamic databases-Thermo-Cak Software

Y. Zheng, Role of w phase in the formation of extremely refined intra­ granular a precipitates in metastable P-titanium alloys, Acta Mater, vol.103, pp.850-858, 2016.

T. Gloriant, G. Texier, F. Sun, I. Thibon, F. Prima et al., Character­ ization of nanophase precipitation in a metastable p titanium-based alloy by electrical resistivity, dilatometry and neutron diffraction, Scripta Mater, vol.58, issue.4, pp.271-274, 2008.

S. Nag, R. Banerjee, R. Srinivasan, .. Y. Hwang, M. Harper et al., the Ti-5Al-5Mo-5V-3Cr-0.5Fe p titanium alloy, vol.57, pp.2136-2147, 2009.

A. R. Brown, D. Clark, J. Eastabrook, and K. S. Jepson, The titanium-niobium system, Nature, vol.201, issue.4922, pp.914-915, 1964.

P. Barriobero-vila, G. Requena, F. Warchomicka, A. Stark, N. Schell et al., Phase transformation kinetics during continuous heating of a p-quenched Ti-10V-2Fe-3AI alloy, j. Mater. Sei, vol.50, issue.3, pp.1412-1426, 2015.

E. G. Obbard, The effect of oxygen on a" martensite and superelasticity in Ti-24Nb-4Zr-8Sn, Acta Mater, vol.59, issue.1, pp.112-125, 2011.

S. Banumathy, R. K. Manda, !. , and A. K. Singh, Structure of orthorhombic martensitic phase in binary Ti-Nb alloys, J. Appl. Phys, vol.106, issue.9, p.93518, 2009.

M. H. Mueller, R. Hitterman, and H. W. Knott, The atomic position parameter in alpha uranium-room temperature and above, Acta Crystallogr, vol.15, p.421, 1962.

Y. Zheng, R. E. Williams, and H. Fraser, Characterization of a previously un­ identified ordered orthorhombic metastable phase in Ti-5Al-5Mo-5V-3Cr, Scripta Mater, vol.113, pp.202-205, 2016.

S. Banerjee, P. Mukhopadhyay, and K. , Phase Transformations: Ex­ amples from Titanium and Zirconium Alloys, vol.12, pp.1-813, 2007.

S. Bein and J. Béchet, Phase transformation kinetics and mechanisms in titanium alloys Ti-6.2.4.6, beta-CEZ and Ti-10.2.3, J. Phys. IV, vol.6, pp.99-108, 1996.
DOI : 10.1051/jp4:1996110
URL : https://hal.archives-ouvertes.fr/jpa-00254142

M. Ikeda, Negative temperature dependence of electrical resistivity in Ti-Mo binary alloys, Proceedings of the 6th World Conference on Titanium, pp.313-318, 1988.

F. Sun, F. Prima, and T. Gloriant, High-strength nanostructured Ti-12Mo alloy from ductile metastable beta state precursor, Mater. Sei. Eng. A, vol.527, pp.4262-4269, 2010.
DOI : 10.1016/j.msea.2010.03.044

J. Ho and E. Collings, Anomalous electrical resistivity in titanium-molybdenum alloys, Phys. Rev. B, vol.6, issue.10, pp.3727-3739, 1972.
DOI : 10.1103/physrevb.6.3727

H. P. Ng, Phase separation and formation of omega phase in the beta matrix of a Ti-V-Cu alloy, Acta Mater, vol.59, issue.8, pp.2981-2991, 2011.

F. Prima, P. Vermaut, G. Texier, D. Anse, !. et al., Evidence of a-nanophase heterogeneous nucleation from w particles in a ?-metastab!e Ti-based alloy by high-reso!ution e!ectron microscopy, Scripta Mater, vol.54, issue.4, pp.645-648, 2006.

T. Duerig, G. Terlinde, and J. Williams, Phase-transformations and tensi!e proper­ ties ofTi-10V-2Fe-3Al, Metall. Trans A Phys Metall. Mater. Sei, vol.11, issue.12, pp.1987-1998, 1980.
DOI : 10.21236/ada074093

F. Bruneseaux, Apport de la diffraction des rayons X à haute énergie sur les transformations de phases, application aux alliages de titanes, 2008.

A. Settefrati, E. Aeby-gautier, B. Appolaire, M. Dehmas, G. Geandier et al., Low temperature transformation in the ?-metastable Ti-5553 alloy, Eur. Symp Marten. Transform, pp.97-102, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01293810

Y. Ohmori, T. Ogo, K. Nakai, and S. Kobayashi, Effects of w-phase precipitation on, Mater. Sei. Eng. A, vol.312, issue.1-2, pp.182-188, 2001.

T. Li, D. Kent, G. Sha, J. M. Cairney, and M. S. Dargusch, The role of w in the pre­ cipitation of a in near-? Ti alloys, Scripta Mater, vol.117, pp.92-95, 2016.

S. Azimzadeh and H. J. Rack, Phase transformations in Ti-6, Metall. Mater. Trans, vol.29, issue.10, pp.2455-2467, 1998.

T. W. Duerig, J. Albrecht, D. Richter, and P. Fischer, Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al, Acta Metall, vol.30, issue.12, pp.2161-2172, 1982.

P. Barriobero-vila, V. B. Oliveira, S. Schwarz, T. Buslaps, and G. Requena, Tracking the a" martensite decomposition during continuous heating of a Ti-6Al-6V2Sn alloy, Acta Mater, vol.135, pp.132-143, 2017.

A. Settefrati, B. Appo!aire, E. Aeby-gautier, Y. L. Bouar, and G. Khelifati, Stress and strain fields calculations associated with the formation of intragranular alpha precipitates, Proceedings of the 12th World Conference on Titanium, 2012.

R. Shi, N. Ma, and Y. Wang, Predicting equilibrium shape of precipitates as function of coherency state, Acta Mater, vol.60, issue.10, pp.4172-4184, 2012.

C. Angelier, S. Bein, and J. Béchet, Building a continuous cooling transformation diagram of ?-CEZ alloy by metallography and electrical resistivity measure­ ments, Metall. Mater. Trans. 28, issue.12, pp.2467-2475, 1997.
DOI : 10.1007/s11661-997-0004-y

E. Aeby-gautier, lsotherrnal a" formation in ? metastable titanium al­ !oys, J. Al!oys. Compd, vol.577, issue.1, pp.439-443, 2012.

B. , A. Settefrati, and E. Aeby-gautier, Stress and strain fields associated with the formation of a, near-? titanium alloys, Mater. Today: Proc. 2 (Supp!ement, pp.589-592, 2015.

G. Charrier, Study of the elemental partitioning for different trans­ formations conditions in the Ti-5553 alloy, Proceedings of the 13th World Conference on Titanium, pp.547-552, 2016.

A. Settefrati, Precipitation sequences in beta metastable phase of Ti5553 alloy during ageing, Proceedings of the 12th World Conference on Titanium, vol.1, 2012.