Light-duty vehicle greenhouse gas and fuel economy standards, Tech. Rep., Int. Counc. Clean Transport, 2017. ,
Developments in thermoplastic composites for automotive applications, Franco-British Symposium on Composite Materials, 2015. ,
Stamp forming of fabric-reinforced thermoplastic composites, Polym. Compos, vol.17, issue.4, pp.596-603, 1996. ,
Thermoplastic composites-rapid processing applications, Compos. Appl. Sci. Manuf, vol.27, issue.4, pp.48-55, 1996. ,
Pre-impregnated textile semi-finished products (prepregs), pp.361-379, 2016. ,
Crystallization kinetics of new low viscosity polyamides 66 for thermoplastic composites processing, Thermochim. Acta, vol.624, pp.27-34, 2016. ,
The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review, Int. J. Material Form, vol.10, issue.4, pp.473-492, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01313827
Manufacturing of thermoplastic composites from commingled yarns-A review, J. Thermoplast. Compos. Mater, vol.11, issue.1, pp.22-56, 1998. ,
An impregnation model for the consolidation of thermoplastic composites made from commingled yarns, J. Compos. Mater, vol.33, issue.8, pp.751-772, 1999. ,
Commingled yarn composites for rapid processing of complex shapes, Compos. Appl. Sci. Manuf, vol.32, issue.11, pp.180-189, 2001. ,
Direct Stamp Forming of Non-consolidated Carbon/thermoplastic Fibre Commingled Yarns, 2003. ,
A combined impregnation and heat transfer model for stamp forming of unconsolidated commingled yarn preforms, Compos. Sci. Technol, vol.64, pp.1637-1651, 2004. ,
Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics, Compos. Sci. Technol, vol.66, issue.3-4, pp.555-570, 2006. ,
Stamp forming of carbon fibre/PA12 composites -a comparison of a reactive impregnation process and a commingled yarn system, Compos. Sci. Technol, vol.66, issue.1, pp.19-35, 2006. ,
, Consolidation Mechanisms and Interfacial Phenomena in Thermoplastic Powder Impregnated Composites, 1995.
Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites, Compos. Appl. Sci. Manuf, vol.78, pp.211-222, 2015. ,
Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization, Mater. Des, vol.93, pp.431-442, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-02174933
A rate-dependent non-orthogonal constitutive model for describing shear behaviour of woven reinforced thermoplastic composites, Compos. Appl. Sci. Manuf, vol.80, pp.194-203, 2016. ,
Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments, Compos. Sci. Technol, vol.64, pp.1453-1465, 2004. ,
Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics, Compos. Struct, vol.61, issue.4, pp.57-63, 2003. ,
Large deformation and slippage mechanism of plain woven composite in bias extension, Compos. Appl. Sci. Manuf, vol.38, issue.8, pp.1821-1828, 2007. ,
Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results, Compos. Appl. Sci. Manuf, vol.39, issue.6, pp.1037-1053, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-01658046
, Evolite XA1481 Technical Data Sheet, 2012.
Manufacture of powder-impregnated thermoplastic composites, J. Thermoplast. Compos. Mater, vol.3, issue.4, pp.325-355, 1990. ,
Challenges associated with shear characterization of a cross-ply thermoplastic lamina using picture frame tests, Compos. Appl. Sci. Manuf, vol.78, pp.181-190, 2015. ,
, , 2003.
Fiji: an open-source platform for biological-image analysis, Nat. Methods, vol.9, issue.7, pp.676-682, 2012. ,
Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements, Compos. Sci. Technol, vol.68, issue.2, pp.506-515, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00498991
Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics, Compos. Appl. Sci. Manuf, vol.67, pp.61-69, 2014. ,
Analysis of the stress components in a textile composite reinforcement, J. Compos. Mater, vol.47, issue.3, pp.269-285, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00785642
Testing and modeling of yarn pull-out in plain woven Kevlar fabrics, Compos. Appl. Sci. Manuf, vol.40, issue.12, pp.1863-1869, 2009. ,
Analysis of the thermomechanical shear behaviour of woven-reinforced thermoplastic-matrix composites during forming, Compos. Appl. Sci. Manuf, vol.86, pp.39-48, 2016. ,
Formability analyses of uni-directional and textile reinforced thermoplastics, Compos. Appl. Sci. Manuf, vol.56, pp.80-92, 2014. ,
Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, Int. J. Material Form, vol.3, issue.S2, pp.1241-1251, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00495110
Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale, Compos. Sci. Technol, vol.68, issue.12, pp.2433-2440, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00850080
Large deformation simulation of anisotropic material using an updated Lagrangian finite element method, Comput. Methods Appl. Mech. Eng, vol.196, pp.3141-3150, 2007. ,
A semi-discrete shell finite element for textile composite reinforcement forming simulation, Int. J. Numer. Methods Eng, vol.79, issue.12, pp.1443-1466, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00515898
Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses, Compos. Sci. Technol, vol.71, issue.5, pp.683-692, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00578046
Implementation of a non-orthogonal constitutive model for the finite element simulation of textile composite draping, Appl. Mech. Mater, vol.553, pp.76-81, 2014. ,
Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark, J. Mater. Process. Technol, vol.210, issue.2, pp.378-388, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00505131
A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Compos. Appl. Sci. Manuf, vol.36, issue.6, pp.859-874, 2005. ,
Analysis of a two-way tensionshear coupling in woven fabrics under combined loading tests: global to local transformation of non-orthogonal normalized forces and displacements, Compos. Appl. Sci. Manuf, vol.88, pp.272-285, 2016. ,
On effect of shear-tension coupling in forming simulation of woven fabric reinforcements, Compos. B Eng, vol.99, pp.17-29, 2016. ,
Strain Hardening and Strain-Rate Effects In the Impact Loading of Cantilever Beams, 1957. ,
An interior algorithm for nonlinear optimization that combines line search and trust region steps, Math. Program, vol.107, issue.3, pp.391-408, 2005. ,
Locking in simulation of composite reinforcement deformations. Analysis and treatment, Compos. Appl. Sci. Manuf, vol.53, pp.109-117, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00938611
Full-field strain measurements in textile deformability studies, Compos. Appl. Sci. Manuf, vol.39, issue.8, pp.1232-1244, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-01657911
The role of the thermoplastic matrix in forming processes of composite materials, Compos. Manuf, vol.2, issue.3-4, pp.90143-90148, 1991. ,
Rheological model for the forming of fabric-reinforced thermoplastic sheets, Compos. Manuf, vol.6, issue.3-4, p.95006, 1995. ,
A lubrication approach to friction in thermoplastic composites forming processes, Compos. Appl. Sci. Manuf, vol.42, issue.8, pp.950-960, 2011. ,
Modeling of friction and shear in thermostamping of composites -Part II, J. Compos. Mater, vol.38, issue.21, pp.1931-1947, 2004. ,
Modeling of friction and shear in thermostamping of composites -Part I, J. Compos. Mater, vol.38, issue.21, pp.1911-1929, 2004. ,
The yarn-to-yarn friction of woven fabrics, Proceedings of the 9th ESAFORM Conference, 2006. ,
Frictional behaviour of high performance fibrous tows: friction experiments, Compos. Appl. Sci. Manuf, vol.44, pp.95-104, 2013. ,
Characterization of the dynamic friction of woven fabrics: experimental methods and benchmark results, Compos. Appl. Sci. Manuf, vol.67, pp.289-298, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01071016
Characterisation of the mesoscopic and macroscopic friction behaviours of glass plain weave reinforcement, Compos. Appl. Sci. Manuf, vol.95, pp.257-266, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01763182
A continuum mechanics analysis of shear characterisation methods, Compos. Appl. Sci. Manuf, vol.109, pp.131-140, 2018. ,
Determination of thermal contact conductance in vacuum-bagged thermoplastic prepreg stacks using infrared thermography, AIP Conference Proceedings 1769, Author(s), 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01609112
Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes, Compos. Struct, vol.93, issue.7, pp.1692-1703, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00935557
Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms, Compos. Appl. Sci. Manuf, vol.68, pp.336-345, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01213267
Impregnation and consolidation in composites made of GF/PP powder impregnated bundles, J. Thermoplast. Compos. Mater, vol.5, issue.1, pp.32-48, 1992. ,
A model for the consolidation of aligned thermoplastic powder impregnated composites, J. Thermoplast. Compos. Mater, vol.8, issue.2, pp.138-162, 1995. ,