R. A. Seppings, Investigation of ice removal from cooled metal surfaces (Doctoral dissertation, 2006.

S. V. Venna and Y. J. Lin, In-Flight De-Icing Self-Actuating Wing Structures with Piezoelectric Actuators, Proceedings of American Society of Mechanical Engineers/International Mechanical Engineering Congress and Exposition, pp.237-245, 2002.

S. V. Venna and Y. J. Lin, Development of Self-Actuating In-Flight De-Icing Structures with, 2003.

, Power Consumption Considerations, Proceedings of the American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, pp.45-53, 2003.

S. V. Venna and Y. J. Lin, Mechatronic development of self-actuating in-flight deicing structures, 2006.

, IEEE/ASME Transactions on Mechatronics, vol.11, issue.5, pp.585-592

S. V. Venna, Y. J. Lin, and G. Botura, Piezoelectric transducer actuated leading edge de-icing with simultaneous shear and impulse forces, Journal of Aircraft, vol.44, issue.2, 2007.

J. L. Palacios, Design, fabrication, and testing of an ultrasonic de-icing system for helicopter rotor blades, 2008.

J. Palacios, E. Smith, and J. Rose, Investigation of an ultrasonic ice protection system for helicopter rotor blades, Annual Forum Proceedings, vol.64, p.609, 2008.

J. Palacios, E. Smith, J. Rose, and R. Royer, Instantaneous de-icing of freezer ice via ultrasonic actuation, AIAA journal, vol.49, issue.6, pp.1158-1167, 2011.

J. Palacios, E. Smith, J. Rose, and R. Royer, Ultrasonic de-icing of wind-tunnel impact icing, Journal of Aircraft, vol.48, issue.3, 2011.

J. L. Palacios and E. C. Smith, Dynamic analysis and experimental testing of thin-walled structures driven by shear tube actuators, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, pp.1-14, 2005.

A. Overmeyer, J. L. Palacios, E. C. Smith, and R. Royer, Rotating testing of a low-power, nonthermal ultrasonic de-icing system for helicopter rotor blades, 2011.

A. Overmeyer, J. Palacios, and E. Smith, Actuator bonding optimization and system control of a rotor blade ultrasonic deicing system, pp.23-26, 1476.

T. Strobl, S. Storm, D. Thompson, M. Hornung, and F. Thielecke, Feasibility study of a hybrid Ice protection system, Journal of Aircraft, vol.52, issue.6, pp.2064-2076, 2015.

T. Strobl, S. Storm, M. Kolb, J. Haag, and M. Hornung, Development of a hybrid ice protection system based on nanostructured hydrophobic surfaces, 2014.

E. Villeneuve, D. Harvey, D. Zimcik, R. Aubert, and J. Perron, Piezoelectric Deicing System for Rotorcraft, vol.60, 2015.

S. Ramanathan, V. V. Varadan, and V. K. Varadan, Deicing of helicopter blades using piezoelectric actuators, SPIE's 7th Annual International Symposium on Smart Structures and Materials, pp.281-292, 2000.

M. K. Kalkowski, T. P. Waters, and E. Rustighi, Removing Surface Accretions with Piezo-Excited High-Frequency Structural Waves, Proc. SPIE 9431, Active and Passive Smart Structures and Integrated Systems, 2015.

M. Budinger, V. Pommier-budinger, G. Napias, and A. C. Silva, Ultrasonic Ice Protection Systems: Analytical and Numerical Models for Architecture Tradeoff, Journal of Aircraft, pp.680-690, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01861799

D. Li, Z. Chen, and M. Shi, Effect of ultrasound on frost formation on a cold flat surface in atmospheric air flow, Experimental Thermal and Fluid Science, vol.34, issue.8, pp.1247-1252, 2010.

Y. Liu, L. J. Bond, and H. Hu, Ultrasonic-attenuation-based technique for ice characterization pertinent to aircraft icing phenomena, AIAA Journal, pp.1-8, 2017.

H. Gao and J. L. Rose, Ice detection and classification on an aircraft wing with ultrasonic shear horizontal guided waves, IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol.56, issue.2, pp.334-344, 2009.

M. Endres, H. Sommerwerk, C. Mendig, M. Sinapius, and P. Horst, Experimental study of two electro-mechanical de-icing systems applied on a wing section tested in an icing wind tunnel, CEAS Aeronautical Journal, vol.8, issue.3, pp.429-439, 2017.

P. Rouset, M. Budinger, and V. Pommier-budinger, Comparison of extensional and flexural modes for the design of piezoelectric ice protection systems, 7th European Conference for Aeronautics and Space Sciences (EUCASS), 2017.
URL : https://hal.archives-ouvertes.fr/hal-02065709

A. M. Mohamed and M. Farzaneh, An experimental study on the tensile properties of atmospheric ice. Cold regions science and technology, vol.68, pp.91-98, 2011.

R. J. Scavuzzo and M. L. Chu, Structural properties of impact ices accreted on aircraft structures, 1987.

P. H. Gammon, H. Kiefte, M. J. Clouter, and W. W. Denner, Elastic constants of artificial and natural ice samples by Brillouin spectroscopy, Journal of Glaciology, vol.29, issue.103, 1983.

U. Nakaya, Visco-elastic properties of snow and ice in Greenland ice cap, Journal of the Faculty of Science, Hokkaido University. Ser, vol.2, issue.3, pp.119-164, 1958.

S. Struggl, J. Korak, and C. Feyrer, A basic approach for wing leading deicing by smart structures, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, pp.79815-79815, 2011.

J. Druez, C. L. Phan, J. L. Laforte, and D. D. Nguyen, The adhesion of glaze and rime on aluminum electrical conductors, Transactions of the Canadian Society for Mechanical Engineering, vol.5, issue.4, pp.215-220, 1979.

J. J. Petrovic, Review mechanical properties of ice and snow, Journal of materials science, vol.38, issue.1, pp.1-6, 2003.

M. M. Riahi, D. Marceau, C. Laforte, and J. Perron, The experimental/numerical study to predict mechanical behaviour at the ice/aluminium interface, Cold Regions Science and Technology, vol.65, issue.2, pp.191-202, 2011.

S. Ice and . Project, Efficient ice protection Systems and simulation Techniques Of ice Release on propulsive systems, European FP7-TRANSPORT, p.605180

H. Sommerwerk and P. Horst, Analysis of the mechanical behavior of thin ice layers on structures including radial cracking and de-icing, Engineering Fracture Mechanics, 2017.

S. Zhang, O. El-kerdi, R. A. Khurram, and W. G. Habashi, FEM analysis of in-flight ice breakup. Finite elements in analysis and design, vol.57, pp.55-66, 2012.

L. Bennani, P. Villedieu, M. Salaun, and P. Trontin, Numerical simulation and modeling of ice shedding: Process initiation, Computers & Structures, vol.142, pp.15-27, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01851568

L. Bennani, P. Villedieu, and M. Salaun, A mixed adhesion-brittle fracture model and its application to the numerical study of ice shedding mechanisms, Engineering Fracture Mechanics, vol.158, pp.59-80, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01662767

V. Pommier-budinger, M. Budinger, N. Tepylo, and X. Huang, Analysis of piezoelectric ice protection systems combined with ice-phobic coatings, 8th AIAA Atmospheric and Space Environments Conference, p.3442, 2016.

V. Pommier-budinger, M. Budinger, P. Rouset, F. Dezitter, F. Huet et al., Electro-mechanical Resonant Ice Protection Systems. Initiation of Fractures with Piezoelectric De-icing Systems
URL : https://hal.archives-ouvertes.fr/hal-01892100

S. Timoshenko, Strength of materials Part 1, 1940.

P. J. Schreurs, Fracture Mechanics. Lecture notes, course 4A780

F. Sanchez, M. Budinger, and I. Hazyuk, Dimensional analysis and surrogate models for the thermal modeling of Multiphysics systems, Applied Thermal Engineering, vol.110, pp.758-771, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01856844

I. Hazyuk, M. Budinger, F. Sanchez, and C. Gogu, Optimal design of computer experiments for surrogate models with dimensionless variables. Structural and Multidisciplinary Optimization, pp.1-17, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01861801