A. Hamasaiid, M. S. Dargusch, C. Davidson, R. S. Tovar, T. Loulou et al., Effect of mould coating materials and thickness on heat transfer in permanent mold casting of alluminium alloys, Mater Trans A, vol.38, issue.6, pp.1303-1319, 2007.

S. Broucaret, A. Michrafy, and G. Dour, Heat transfer and thermo-mechanical stresses in a gravity die casting: influence of process parameters, J. Mater Process Tech, vol.110, pp.211-218, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01718087

F. Decultieux, Caractérisation du comportement thermomécanique D'alliages de fonderie pendant la solidification Ph D thesis Paris: Ecole des Mines de Paris, 1996.

G. Dour, Fonderie-aide-Mémoire. Paris: dunod, 2004.

L. Zhang and L. Li, Determination of heat transfer coefficients at metal/chill interface in the casting solidification process, Heat Mass Transf, vol.49, pp.1071-80, 2013.

H. Biloni and B. Chalmers, Predendritic solidification, Trans Metall Soc AIME, vol.233, p.373, 1965.

H. Biloni and B. Chalmers, Origin of the equiaxed zone in small ingots, J Mater Sci Lett, vol.3, issue.2, pp.139-188, 1968.

M. Prates and H. Biloni, Variables affecting the nature of the chill zone, Metall Mater Trans, vol.3, pp.1501-1511, 1972.

M. Flemings, Solidification Processing, vol.5, pp.2121-2134

A. Garcia, T. W. Clyne, and M. Prates, Mathematical model for the unidirectional solidification of metals. ii-massive molds, Metall Mater Trans B, vol.10, issue.1, pp.85-192, 1979.

A. Garcia and M. Prates, Mathematical model for the unidirectional solidification of metals, Pt. 1. Cooled molds. Metall Mater Trans B, vol.9, issue.3, pp.449-3457, 1978.

T. W. Clyne and A. Garcia, Assessment of a new model for heat flow during unidirectional solidification of metals, Int J Heat Mass Transf -Theory Appl, vol.23, issue.6, pp.90031-90040, 1980.

V. Davies, Heat Transfer in Gravity Die Casting, British Foundryman, vol.73, issue.12, pp.331-334

J. V. Beck, Surface heat flux determination using an integral method, Nucl Eng Des, vol.7, issue.2, pp.90058-90065, 1968.

K. Ho and R. D. Pehlke, Transient methods for determination of metal-mold interfacial heat transfer, AFS Trans, vol.91, pp.689-98, 1983.

P. Schmidt, Heat transfer in permanent mould casting PhD thesis Stockholm; Royal Institute of Technology, 1994.

W. D. Griffiths, A model of the interfacial heat-transfer coefficient during unidirectional solidification of an aluminum alloy, Metall and Mater Trans B, vol.31, issue.2,1, pp.285-95, 2000.

D. R. Pehlke and J. T. Berry, Investigation of heat transfer at the Mold/Metal interface in permanent Mold casting of light alloys, vol.85, 2005.

C. A. Santos, A. Garcia, C. R. Fric, and J. A. Spim, Evaluation of heat transfer coefficient along the secondary cooling zones in the continous casting of steel billets, Inverse Probl. Eng, vol.14, issue.6, pp.687-700, 2006.

A. M. Assar, Mould Surface Roughness and Interfacial Heat Transfer Using Heat Flow Model, Material Science and Technology, vol.13, pp.702-704

D. F. Bouchard, G. Hamel, J. P. Nadeau-bellemare, S. Tremblay, and D. Simard, Effects of substrate surface conditions on heat transfer and shell morphology in the solidification of a copper alloy, Metall and Mater Trans B, vol.32, issue.1, pp.111-119, 2001.

Y. Nishida, W. Droste, and S. Engler, The air-gap formation process at the casting-mold interface and the heat transfer mechanism through the gape, Metall. Mater Trans B, vol.17, pp.833-877, 1986.

T. Kumar and K. N. Prabhu, Heat flux transients at the Casting/Chill interface during solidification of aluminum base alloys, Metall Mater Trans B, vol.22, issue.5, pp.717-5727, 1991.

M. A. Gafur, M. N. Haque, and K. N. Prabhu, Effect of chill thickness and superheat on Casting/Chill interfacial heat transfer during solidification of commercially pure aluminium, Mater Process Tech, vol.133, issue.3, pp.459-463, 2003.

K. N. Parbhu, B. Chowdary, and N. Venkatraman, Casting/Mold thermal contact heat transfer during solidification of Al-Cu-Si alloy (Lm 21) plates in thick and thin molds, Mater Eng Perform, vol.14, issue.5, pp.604-613, 2005.

Z. P. Guo, S. M. Xiong, and B. C. Liu, Effect of process parameters, casting thickness, and alloys on the interfacial heat-transfer coefficient in the high-pressure die-casting process, Metall and Mat Trans A, vol.39, pp.2896-22905, 2008.

G. Dour, M. Dargusch, C. Davidson, and A. Nef, Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting: effect of the process parameters, J Mater Process Technol, vol.169, issue.2, pp.223-256, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01851436

A. Hamasaiid, Heat transfer at the casting/die interface in high pressure die casting-experimental results and contribution to modeling, TMS Conference Proceedings, pp.1-9, 2006.

M. S. Dargusch, A. Hamasaiid, and G. Dour, An inverse model to determine the heat transfer coefficient and its evolution with time during solidification of light alloys, Int J Nonlinear Sci Numer Simul, vol.9, issue.3, pp.275-82, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01661801

F. Chiesa, Quantifying permanent mold coating's functional properties, Trans Am Foundrym Soc, vol.106, pp.589-94, 1998.

G. Dour and A. Hamasaiid, Wilhelmy surface tension measurement applied to metallic alloys -static anddynamic measurements in molten and semi-solid states. available on researchegate, 2015.

S. Wei, J. Dillingham, M. R. Jiranek, and . Pischel, Influence of Mold Coating on Heat Transport in Permanent Mold Casting Process (96-90), AFS Transactions, pp.251-262, 1996104.