Flue Gas Desulphurization in Circulating Fluidized Beds

Yiming Deng (1) , Renaud Ansart (1) , Jan Baeyens (2) , Zhang Huili (2)

1 LGC - Laboratoire de Génie Chimique
2 Beijing University of Chemical Technology

Sulphur dioxide (SO2) is mostly emitted from coal‐fueled power plants, from waste incineration, from sulphuric acid manufacturing, from clay brick plants and from treating nonferrous metals. The emission of SO2 needs to be abated. Both wet scrubbing (absorption) and dry or semi‐dry (reaction) systems are used. In the dry process, both bubbling and circulating fluidized beds (BFB, CFB) can be used as contactor. Experimental results demonstrate a SO2‐removal efficiency in excess of 94% in a CFB application. A general model of the heterogeneous reaction is proposed, combining the external diffusion of SO2 across the gas film, the internal diffusion of SO2 in the porous particles and the reaction as such (irreversible, 1st order). For the reaction of SO2 with a fine particulate reactant, the reaction rate constant and the relevant contact time are the dominant parameters. Application of the model equations reveals that the circulating fluidized bed is the most appropriate technique, where the high solid to gas ratio guarantees a high conversion in a short reaction time. For the CFB operation, the required gas contact time in a CFB at given superficial gas velocities and solids circulation rates will determine the SO2 removal rate.

Mots clés: SO2 abatement; Dry or semi‐dry reaction; Calcium oxide; Model; Efficiency

Domaines: Génie chimique; Génie des procédés

Yiming Deng, Renaud Ansart, Jan Baeyens, Zhang Huili. Flue Gas Desulphurization in Circulating Fluidized Beds. Energies, 2019, 12 (20), pp.1-19. ⟨10.3390/en12203908⟩. ⟨hal-02339692⟩