S. Heimbs, F. Strobl, and P. Middendorf, Composite crash absorber for aircraft fuselage applications, WIT Trans Built Environ, vol.113, pp.3-14, 2010.

J. Van-beek, Dynamic seat testing and head injury criteria -An aircraft manufacturer's experience and a view on the future, Proceedings of the 21st Congress of International Council of the Aeronautical Sciences, pp.13-18, 1998.

A. Melbourne,

C. Olschinka, A. Schumacher, and D. Riedel, Dynamic simulation of flight passenger seats, Proceedings 5, LS-DYNA Anwenderforum, pp.12-13, 2006.

G. Ulm,

M. M. Abedi, A. Niknejad, and G. H. Liaghat, Foam-filled grooved tubes with circular cross section under axial compression: an experimental study, Iran J Sci Technol Trans Mech Eng, vol.42, issue.4, pp.401-413, 2018.

Z. Qaiser, O. M. Qureshi, and S. Johnson, Thin walled circular tubes with sinusoidal embedded patterns under axial impacts, Thin-Walled Struct, vol.99, pp.76-82, 2016.

G. L. Farley, Energy absorption of composite materials, J Compos Mater, vol.17, issue.3, pp.267-279, 1983.

P. H. Thornton, The crush behavior of pultruded tubes at high strain rates, J Compos Mater, vol.24, issue.6, pp.594-615, 1990.

H. Hamada, S. Ramakrishna, and H. Satoh, Crushing mechanism of carbon fibre/PEEK composite tubes, Composites, vol.26, issue.11, pp.749-755, 1995.

A. G. Mamalis, M. Robinson, and D. E. Manolakos, Crashworthy capability of composite material structures, Compos Struct, vol.37, issue.2, pp.109-134, 1997.

D. Hull, A unified approach to progressive crushing of fibrereinforced composite tubes, Compos Sci Technol, vol.40, issue.4, pp.377-421, 1991.

S. T. Pinho, P. P. Camanho, and M. F. De-moura, Numerical simulation of the crushing process of composite materials, Int J Crashworthiness, vol.9, issue.3, pp.263-276, 2004.

A. Supian, S. M. Sapuan, and M. Zuhri, Hybrid reinforced thermoset polymer composite in energy absorption tube application: a review, Defence Technol, vol.14, issue.4, pp.291-305, 2018.

A. Brighton, M. Forrest, and M. Starbuck, Strain rate effects on the energy absorption of rapidly manufactured composite tubes, J Compos Mater, vol.43, issue.20, pp.2183-2200, 2009.

H. A. Israr, S. Rivallant, and C. Bouvet, Finite element simulation of 0 /90 CFRP laminated plates subjected to crushing using a free-face-crushing concept, Compos Part A: Appl Sci Manuf, vol.62, pp.16-25, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00978464

A. G. Evans and W. F. Adler, Kinking as a mode of structural degradation in carbon fiber composites, Acta Metall, vol.26, issue.5, pp.725-738, 1978.

R. Gutkin, S. T. Pinho, and P. Robinson, A finite fracture mechanics formulation to predict fibre kinking and splitting in CFRP under combined longitudinal compression and in-plane shear, Mech Mater, vol.43, issue.11, pp.730-739, 2011.

P. H. Thornton, J. J. Harwood, and P. Beardmore, Fiber-reinforced plastic composites for energy absorption purposes, Compos Sci Technol, vol.24, issue.4, pp.275-298, 1985.

A. L. Browne, N. L. Johnson, and M. E. Botkin, Composite crash box: roll wrap fabrication and dynamic axial crush performance, Proceedings of the ASME 2007 International Mechanical Engineering Congress and Exposition, vol.16, 2007.

D. W. Schmueser and L. E. Wickliffe, Impact energy absorption of continuous fiber composite tubes, J Eng Mater Technol, vol.109, issue.1, pp.72-77, 1987.

A. L. Browne and N. L. Johnson, Dynamic axial crush tests of roll wrapped composite tubes: plug vs. non-plug crush initiators, Proceedings of the ASME 2005 International Mechanical Engineering, 2005.

Y. Wang, J. Feng, and J. Wu, Effects of fiber orientation and wall thickness on energy absorption characteristics of carbonreinforced composite tubes under different loading conditions, Compos Struct, vol.153, pp.356-368, 2016.

R. Muralikannan, R. Velmurugan, and G. L. Eswaraprasad, Energy absorption characteristics of circular composites tubes in quasi static and impact loading, Proceedings of the IMPLAST 2010 Conference, pp.12-14, 2010.

A. G. Mamalis, Y. B. Yuan, and G. L. Viegelahn, Collapse of thin-wall composite sections subjected to high speed axial loading, Int J Veh Des, vol.13, issue.5-6, pp.564-519, 1992.

G. C. Jacob, J. F. Fellers, and S. Simunovic, Energy absorption in polymer composites for automotive crashworthiness, J Compos Mater, vol.36, issue.7, pp.813-850, 2002.

J. Xu, Y. Ma, and Q. Zhang, Crashworthiness of carbon fiber hybrid composite tubes molded by filament winding, Compos Struct, vol.139, pp.130-140, 2016.

M. Waimer, D. Kohlgr?-uber, and D. Hachenberg, Experimental study of CFRP components subjected to dynamic crash loads, Compos Struct, vol.105, pp.288-299, 2013.

J. A. Lavoie and S. Kellas, Dynamic crush tests of energy-absorbing laminated composite plates, Compos Part A: Appl Sci Manuf, vol.27, issue.6, pp.467-475, 1996.

L. Chiu, B. G. Falzon, and D. Ruan, Crush responses of composite cylinder under quasi-static and dynamic loading, Compos Struct, vol.131, pp.90-98, 2015.

A. Galib, D. Limam, and A. , Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes, Thin-Walled Struct, vol.42, issue.8, pp.1103-1137, 2004.

M. Costas and L. E. Romera, Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers, Int J Impact Eng, vol.62, pp.166-181, 2013.

G. L. Farley, The effects of crushing speed on the energy-absorption capability of composite tubes, J Compos Mater, vol.25, issue.10, pp.1314-1329, 1991.

G. L. Farley, Relationship between mechanical property and energy-absorption trends for composite tubes, 1992.

M. R. Schultz, M. W. Hyer, and H. P. Fuchs, Static and dynamic energyabsorption capacity of graphite-epoxy tubular specimens, Mech Compos Mater Struct, vol.8, issue.3, pp.231-247, 2001.

A. L. Browne and K. L. Zimmerman, Dynamic axial crush of automotive rail-sized composite tubes: part 2 -tubes with braided reinforcements (Carbon, KevlarV R , and Glass) and non-plug crush initiators, Proceedings of the ASME 2002 International Mechanical Engineering Congress and Exposition, Transportation: Making Tracks for Tomorrow's Transportation

M. Okano, K. Sugimoto, and A. Nakai, Energy absorption properties of braided composite tubes, Composite Technologies for 2020, Proceedings of the Fourth Asian-Australasian Conference on Composite Materials (ACCM 4), pp.466-471, 2004.

A. G. Mamalis, D. E. Manolakos, and M. B. Ioannidis, On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental, Compos Struct, vol.69, issue.4, pp.407-420, 2005.

A. G. Mamalis, D. E. Manolakos, and M. B. Ioannidis, On the experimental investigation of crash energy absorption in laminate splaying collapse mode of FRP tubular components, Compos Struct, vol.70, issue.4, pp.413-429, 2005.

C. J. Mcgregor, R. Vaziri, and X. Xiao, Finite element modelling of the progressive crushing of braided composite tubes under axial impact, Int J Impact Eng, vol.37, issue.6, pp.662-672, 2010.

M. David, A. F. Johnson, and H. Voggenreiter, Analysis of crushing response of composite crashworthy structures, Appl Compos Mater, vol.20, issue.5, pp.773-787, 2013.

R. Murugan, R. Ramesh, and K. Padmanabhan, Investigation on static and dynamic mechanical properties of epoxy based woven fabric glass/carbon hybrid composite laminates, Procedia Eng, vol.97, pp.459-468, 2014.

O. Dorival, P. Navarro, and S. Marguet, Experimental study of impact energy absorption by reinforced braided composite structures: dynamic crushing tests, Compos Part B: Eng, vol.78, pp.244-255, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01183142

D. Hu, Y. Wang, and L. Dang, Energy absorption characteristics of composite tubes with different fibers and matrix under axial quasi-static and impact crushing conditions, J Mech Sci Technol, vol.32, issue.6, pp.2587-2599, 2018.

Y. Tong and Y. Xu, Improvement of crash energy absorption of 2D braided composite tubes through an innovative chamfer external triggers, Int J Impact Eng, vol.111, pp.11-20, 2018.

Y. Yang, K. Ahmed, and R. Zhang, A study on the energy absorption capacity of braided rod composites, Compos Struct, vol.206, pp.933-940, 2018.

V. M. Karbhari and J. E. Haller, Rate and architecture effects on progressive crush of braided tubes, Compos Struct, vol.43, issue.2, pp.93-108, 1998.

C. J. Mcgregor, R. Vaziri, and A. Poursartip, Axial crushing of triaxially braided composite tubes at quasi-static and dynamic rates, Compos Struct, vol.157, pp.197-206, 2016.

C. Priem, R. Othman, and P. Rozycki, Experimental investigation of the crash energy absorption of 2.5D-braided thermoplastic composite tubes, Compos Struct, vol.116, pp.814-826, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01240159

M. A. Jim-enez, A. Miravete, and E. Larrode, Effect of trigger geometry on energy absorption in composite profiles, Compos Struct, vol.48, issue.1-3, pp.107-111, 2000.

D. Hu, C. Zhang, and X. Ma, Effect of fiber orientation on energy absorption characteristics of glass cloth/epoxy composite tubes under axial quasi-static and impact crushing condition, Compos Part A: Appl Sci Manuf, vol.90, pp.489-501, 2016.

J. Chambe, C. Bouvet, and O. Dorival, Energy absorption capacity of composite thin-wall circular tubes under axial crushing with different trigger initiations, J Compos Mater, vol.54, issue.10, pp.1281-1304, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02372713