A. Tropis, M. Thomas, J. L. Bounie, and P. Lafon, Certification of the composite outer wing of the ATR72, J. Aero. Eng, Proc. Inst. Mech. Eng. Part G, vol.209, pp.327-339, 1994.

J. Rouchon, Certification of Large Aircraft Composite Structures, Recent Progress and New Trends in Compliance Philosophy, 17th ICAS, 1990.

E. Morteau and C. Fualdes, Composites @ Airbus, Damage Tolerance Methodology. FAA Workshop for Composite Damage Tolerance and Maintenance, 2006.

J. B. Chang, V. K. Goyal, J. C. Klug, and J. I. Rome, Composite Structures Damage Tolerance Analysis Methodologies, 2012.

. Astm-d7136/d7136m, Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event, 2015.

. Astm-d7137/d7137m, Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates, 2012.

G. Caprino and V. Lopresto, The significance of indentation in the inspection of carbon fibre-reinforced plastic panels damaged by low-velocity impact, Compos. Sci. Technol, vol.60, pp.196-203, 2000.

S. Abrate, B. Castani?-e, and Y. D. Rajapakse, Dynamic Failure of Composite and Sandwich Structures, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02185682

P. Perugini, A. Riccio, and F. Scaramuzzino, Influence of delamination growth and contact phenomena on the compressive behavior of composite panels, J. Compos. Mater, vol.33, pp.1433-1456, 1999.

S. Rivallant, C. Bouvet, E. A. Abdallah, B. Broll, and J. J. Barrau, Experimental analysis of CFRP laminates subjected to compression after impact: the role of impactinduced cracks in failure, Compos. Struct, vol.111, pp.147-157, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00933459

T. D. Mcquigg, Compression after Impact Experiments and Analysis on Honeycomb Core Sandwich Panels with Thin Facesheets, p.217157, 2011.

A. R. Kristnama, X. Xu, D. Nowell, M. R. Wisnom, and S. R. Hallett, Experimental investigation of high velocity oblique impact and residualtensile strength of carbon/epoxy laminates, Compos. Sci. Technol, vol.182, p.107772, 2019.

Q. D. Yang, B. N. Cox, X. J. Fang, and Z. Q. Zhou, Virtual testing for advanced aerospace composites: advances and future needs, J. Eng. Mater. Technol, vol.133, p.11002, 2011.

O. Vallmaj?-o, I. R. C?-ozar, C. Furtado, R. Tavares, A. Arteiro et al., Virtual calculation of the B-value allowables of notched composite laminates, Compos. Struct, vol.212, pp.11-21, 2019.

A. Vertex-project, , 2020.

J. Serra, Etude exp? erimentale et num? erique de la propagation de coupure dans des stratifi? es composites soumis ? a des chargements complexes, 2016.

J. Serra, J. E. Pierri?-e, J. C. Passieux, J. N. P?-eri?-e, C. Bouvet et al., Castani? e, Validation of aeronautical composite structures under multiaxial loading: the VERTEX Project. Part 1: experimental setup, instrumentation with FE-SDIC and procedures, Compos. Struct, vol.179, pp.224-244, 2017.

J. Serra, J. E. Pierri?-e, J. C. Passieux, J. N. P?-eri?-e, C. Bouvet et al., Validation of aeronautical composite structures under multiaxial loading: the VERTEX Project. Part 2: load envelopes for the assessment of panels with large notches, Compos. Struct, vol.180, pp.550-567, 2017.

K. Wolf and H. Kossira, An Efficient Test Method for the Experimental Investigation of the Post-buckling Behavior of Curved Shear Panels, ECCM Composite Testing and Standardization, 1992.

G. Romeo and G. Frulla, Buckling and Post-buckling Behavior of Anisotropic Plates under Combined Biaxial Compression and Shear Loads, ECCM Composite Testing and Standardization, 1992.

M. Rouse, R. D. Young, and R. E. Gehrki, Structural Stability of a Stiffened Aluminum Fuselage Panel Subjected to Combined Mechanical and Internal Pressure Loads, p.1423, 2003.

A. Bergan, J. G. Bakuckas, A. Lovejoy, D. Jegley, K. Linton et al., Full-scale test and analysis of a PRSEUS fuselage panel to assess damage-containment features, Aircraft Airworthiness & Sustainment Conference, 2011.

R. W. Peters, Buckling tests of flat rectangular plates under combined shear and longitudinal compression, 1948.

H. Klein, General about buckling tests with thin-walled shells, Rap. DLR-Mitt, pp.89-102, 1989.

G. Zucco, V. Oliveri, D. Peeters, R. Telford, G. J. Clancy et al., Static test of a thermoplastic composite wingbox under shear and bending moment, 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 8-12, 2018.

. Kissimmee, , 2018.

B. Castani?-e, J. J. Barrau, J. P. Jaouen, and S. Rivallant, Combined shear/compression structural testing of asymmetric sandwich structures, Exp. Mech, vol.44, pp.461-472, 2004.

B. Castani?-e, J. J. Barrau, and J. P. Jaouen, Theoretical and experimental analysis of asymmetric sandwich structures, Compos. Struct, vol.55, pp.156-164, 2002.

J. Pierr?-e, J. Passieux, and J. , P? eri? e, Finite element stereo digital image correlation: framework and mechanical regularization, Exp. Mech, vol.57, pp.443-456, 2017.

J. C. Passieux, F. Bugarin, C. David, J. N. P?-eri?-e, and L. Robert, Multiscale displacement field measurement using digital image correlation: application to the identification of elastic properties, Exp. Mech, vol.55, pp.121-137, 2015.
URL : https://hal.archives-ouvertes.fr/hal-00949038

C. Bouvet, B. Castani?-e, M. Bizeul, and J. J. Barrau, Low velocity impact modeling in laminate composite panels with discrete interface elements, Int. J. Solid Struct, vol.46, pp.2809-2821, 2009.

V. Achard, C. Bouvet, B. Castani?-e, and C. Chirol, Discrete Ply modelling of open hole tensile tests, Compos. Struct, vol.113, pp.369-381, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01063573

J. Serra, C. Bouvet, B. Castani?-e, and C. Petiot, Scaling effect in notched composites: the Discrete Ply Model approach, Compos. Struct, vol.148, pp.127-143, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01828731

N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure, Compos. Struct, vol.106, pp.549-555, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00858522

. St-simpact-platform, , 2020.

J. C. Passieux, P. Navarro, J. P?-eri?-e, S. Marguet, and J. Ferrero, A digital image correlation method for tracking planar motions of rigid spheres : application to medium velocity impacts, Exp. Mech, vol.54, pp.1453-1466, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01025172

H. Wagner, Flat Sheet Metal Girders with Very Thin Web: Part III -Sheet Metal Girders with Spars Resistant to Bending. The Stress in Uprights -Diagonal Tension Fields, 1931.

P. Sztefek and R. Olsson, Tensile stiffness distribution in impacted composite laminates determined by an inverse method, Compos. Part A, vol.39, pp.1282-1293, 2008.

P. Sztefek and R. Olsson, Non linear compressive stiffness distribution in impacted composite laminates determined by an inverse method, Compos. Part A, vol.40, pp.260-272, 2009.