Skip to Main content Skip to Navigation
  1. Search
Help


...
hal-02134620v1  Journal articles
Vincent Wagner, Floran Barelli, Gilles Dessein, Raynald Laheurte, Phillipe Darnis et al.  Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure
Journal of Manufacturing Science and Engineering, American Society of Mechanical Engineers, 2017, 140 (3), pp.031010. ⟨10.1115/1.4038597⟩
...
hal-01905411v1  Conference papers
Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel et al.  Optimization of thermal joint behaviour for the detection of bonding defects by infrared thermography
PhotoMechanics 2018, Mar 2018, Toulouse, France. pp.0
hal-01950749v1  Journal articles
Vincent Wagner, Floran Barelli, Gilles Dessein, Raynald Laheurte, Philippe Darnis et al.  Comparison of the chip formations during turning of Ti64 β and Ti64 α+β
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 2017, pp.0954405417728309
...
hal-01895926v1  Journal articles
Sébastien Seguy, Gilles Dessein, Lionel Arnaud, Tamás Insperger. Control of Chatter by Spindle Speed Variation in High-Speed Milling
Advanced Materials Research, Trans Tech Publications, 2010, 112, pp.179-186. ⟨10.4028/www.scientific.net/AMR.112.179⟩
...
hal-00952706v1  Journal articles
Etienne Gourc, Sébastien Seguy, Gilles Dessein. Dynamical modeling of spindle with active magnetic bearing for milling process
Advanced Materials Research, Trans Tech Publications, 2012, 423, pp.200-209. ⟨10.4028/www.scientific.net/AMR.423.200⟩
...
hal-00783788v1  Journal articles
Francisco Javier Campa, Luis Norberto López de Lacalle, Gorka Urbicain, Aitzol Lamikiz, Sébastien Seguy et al.  Critical thickness and dynamic stiffness for chatter avoidance in thin floors milling
Advanced Materials Research, Trans Tech Publications, 2011, 188, pp.116-121. ⟨10.4028/www.scientific.net/AMR.188.116⟩
...
tel-02503729v1  Theses
Shahriar Bakrani Balani. Additive manufacturing of the high-performance thermoplastics: Experimental study and numerical simulation of the Fused Filament Fabrication
Materials. Institut National Polytechnique de Toulouse, 2019. English
hal-01703241v1  Conference papers
Vanessa Vidal, Yannick Balcaen, Florence Pettinari-Sturmel, Joël Douin, Philippe Lours et al.  Experimental Study of the Deformation Mechanisms in Textured Alpha-titanium Alloy Sheets
Ti 2011 - 12th World conference on titanium, Jun 2011, Beijing, China. pp.1290-1293
...
hal-01822896v1  Conference papers
Julien Patou, Emmanuel de Luycker, Rébecca Bonnaire, Thierry Cutard, Gérard Bernhart. Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part
21st International ESAFORM Conference on Material Forming, Apr 2018, Palermo, Italy. pp.020021-1, ⟨10.1063/1.5034822⟩
...
hal-01515536v1  Conference papers
Lilian Martineau, France Chabert, Gérard Bernhart, Toufik Djilali. Mechanical behavior of amorphous PEEK in the rubbery state
ECCM17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany. 8 p
...
hal-01490599v1  Journal articles
Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel et al.  Bonded repair issues for composites: An investigation approach based on infrared thermography
NDT and E International, Elsevier, 2017, 85, pp.27-33. ⟨10.1016/j.ndteint.2016.10.003⟩
...
hal-01758594v1  Journal articles
Matthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel et al.  NDT-based design of joint material for the detection of bonding defects by infrared thermography
NDT and E International, Elsevier, 2018, 93, pp.157-163. ⟨10.1016/j.ndteint.2017.10.005⟩
...
hal-01715601v1  Conference papers
Shahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel, Christian Garnier. Toward improvement of the properties of parts manufactured by FFF ( Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon
ESAFORM 2017, Apr 2017, Dublin, Ireland. pp. 040008
hal-02285228v1  Conference papers
Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel et al.  Identification of the elastic properties of composite materials
International Conference on Structural Analysis of Advanced Materials, Sep 2013, ile de Kos, Greece
...
hal-00995276v1  Journal articles
Victor Munoz, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel et al.  Application of non destructive testing to the detection of aeronautical defects in composite structure
Nonconventional Technologies Review, 2013
...
hal-00952716v1  Conference papers
Christian Garnier, Bernard Lorrain, Marie-Laetitia Pastor. Impact damage evolution under fatigue loading by InfraRed Thermography on composite structures
14th International Conference of Experimental Mechanics (ICEM 14), Jul 2010, Poitiers, France
hal-02044395v1  Conference papers
J. Huang, Marie-Laetitia Pastor, C. Garnier, Xiaojing Gong. Rapid determination of fatigue limits of composites by Luong’s method and its improvement
21th International Conference on Composite Materials 2017 (ICCM-21), 2017, Xi'an, China. 12p
...
hal-01058901v1  Conference papers
Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel et al.  Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy
VIIIèmes Journées d'Etudes Techniques - International congress for applied mechanics JET 2014, Apr 2014, Marrakech, Maroc
hal-02187517v1  Conference papers
Jia Huang, Marie-Laetitia Pastor, Christian Garnier, Xiaojing Gong. Rapid evaluation of S-N curve for composite laminates on thermographic approach
12th International Fatigue Congress (FATIGUE 2018), 2018, Poitiers, France
hal-01005711v1  Conference papers
Christian Garnier, Marie-Laetitia Pastor, Bernard Lorrain. Finite element model for impact on composite structures
16th International Conference on Composite Structures, Jun 2011, Porto, Portugal
...
hal-01025714v1  Conference papers
Damien Busca, Marina Fazzini, Bernard Lorrain, Sébastien Mistou, Moussa Karama et al.  Suivi d'essais de fatigue bi-axiale sur des composites stratifiés
13ème colloque international francophone sur les "Méthodes et Techniques Optiques pour l'Industrie" - CMOI2013, Nov 2013, Orléans, France. pp.1
...
hal-00949835v1  Journal articles
Marie-Laetitia Pastor, Christian Garnier, Christophe Pescay. Comparison of two non destructive tests in carbon/epoxy composites
Journal of Materials Science and Engineering, 2010, vol. 4
...
hal-01905427v1  Conference papers
Shahriar Bakrani Balani, Arthur Cantarel, France Chabert, Valérie Nassiet. Influence of parameters controlling the extrusion step in fused filament fabrication (FFF) process applied to polymers using numerical simulation
ESAFORM 2018, Apr 2018, Palermo, Italy. pp.140003-1-140003-6, ⟨10.1063/1.5034995⟩
...
hal-01025540v1  Conference papers
Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel et al.  Identification of the elastic properties in CFRP composites
International Symposium on Aircraft Materials ACMA 2014, Apr 2014, Marrakech, Morocco. pp. 61-62
...
hal-01212100v1  Journal articles
Victor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel et al.  Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization
Advances in Aircraft and Spacecraft Science, Techno-Press, 2015, vol. 2 (n° 3), pp. 249-260. ⟨10.12989/aas.2015.2.3.249⟩
...
hal-02053211v1  Conference papers
Farid Miah, Emmanuel de Luycker, Frederic Lachaud, Yann Landon, Robert Piquet. Effect of different cutting depths to the cutting forces and machining quality of CFRP parts in orthogonal cutting ─ a numerical and experimental comparison
ASME 2018 International Mechanical Engineering Congress and Exposition IMECE2018, Nov 2018, Pittsburgh, United States. pp.1-11
hal-02187541v1  Conference papers
Marie-Laetitia Pastor, Jia Huang, Christian Garnier, Xiaojing Gong. Détermination rapide de la limite de fatigue et des courbes S-N des composites à partir de la thermographie infrarouge
Journée Scientifique et Technique (JST) Fatigue des matériaux et structures composites, Dec 2017, Marseille, France
...
hal-01905409v1  Conference papers
Benjamin Valès, Victor Alfonso Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin et al.  Thermographic investigation of heat source in transversely isotropic composites
International Conference on Structural Analysis of Advanced Materials (ICSAAM 2017), Sep 2017, Bucarest, Romania. pp.030043-1
...
hal-01212111v1  Conference papers
Matthias Barus, Francis Collombet, Hélène Welemane, Laurent Crouzeix, Arthur Cantarel et al.  Infrared signatures of bonded interfaces for the repair of primary structures in composite materials
20th International Conference on Composite Materials, Jul 2015, Copenhague, Denmark. pp.0
...
hal-02135080v1  Journal articles
John Le Dref, Yann Landon, Gilles Dessein, Christine Espinosa. Modelling kinematics and cutting forces in vibration assisted drilling
Mechanics & Industry, EDP Sciences, 2016, 17 (3), pp.1-10. ⟨10.1051/meca/2015078⟩
...
hal-01527215v1  Conference papers
Matthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel et al.  A New NDT Method for the study of composite bonded repair
17th European Conference on Composite Materials (ECCM17), Jun 2016, Munich, Germany. pp.0
hal-02187521v1  Conference papers
Jia Huang, Marie-Laetitia Pastor, Christian Garnier, Xiaojing Gong. Rapid evaluation fatigue life in cross-ply CFRP laminates based on fracture fatigue entropy
. 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), 2018, Tarbes, France
hal-01950780v1  Journal articles
Floran Barelli, Vincent Wagner, Raynald Laheurte, Gilles Dessein, Philippe Darnis et al.  Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool\textendashchip contact lengths
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 2017, 231 (13), pp.2384--2395
...
hal-01924946v1  Journal articles
Jia Huang, Marie-Laetitia Pastor, Christian Garnier, Xiaojing Gong. Rapid evaluation of fatigue limit on thermographic data analysis
International Journal of Fatigue, Elsevier, 2017, 104, pp.293-301. ⟨10.1016/j.ijfatigue.2017.07.029⟩
...
hal-00944576v1  Journal articles
Michel Mousseigne, Yann Landon, Sébastien Seguy, Gilles Dessein, Jean-Max Redonnet. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory
International Journal of Machine Tools and Manufacture, Elsevier, 2013, 65, pp.47-57. ⟨10.1016/j.ijmachtools.2012.10.001⟩
...
hal-00752041v1  Journal articles
Etienne Gourc, Sébastien Seguy, Lionel Arnaud. Chatter milling modeling of active magnetic bearing spindle in high-speed domain
International Journal of Machine Tools and Manufacture, Elsevier, 2011, 51 (12), pp.928-936. ⟨10.1016/j.ijmachtools.2011.08.008⟩
...
hal-02100583v1  Journal articles
M. Doumeng, F. Ferry, K. Delbé, T. Mérian, F. Chabert et al.  Evolution of crystallinity of PEEK and glass-fibre reinforced PEEK under tribological conditions using Raman spectroscopy
Wear, Elsevier, 2019, 426-427 (Part B), pp.1040-1046. ⟨10.1016/j.wear.2018.12.078⟩
...
hal-00944573v1  Journal articles
John Le Dref, Florent Eyma, Gilles Dessein, Louis Etienne Denaud, Yann Landon. Comparative study of tools in drilling composites T700-M21 and T800-M21
Advanced Materials Research, Trans Tech Publications, 2013, vol. 698, pp. 59-68. ⟨10.4028/www.scientific.net/AMR.698.59⟩
...
hal-01820115v1  Journal articles
Oleksii Shtehin, Sébastien Seguy, Vincent Wagner, Yann Landon, Gilles Dessein et al.  Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: Experimental study
Machining Science and Technology, Taylor & Francis, 2018, 22 (4), pp.621-637. ⟨10.1080/10910344.2017.1382515⟩
...
hal-01933680v1  Journal articles
Sébastien Seguy, Tamás Insperger, Lionel Arnaud, Gilles Dessein, Grégoire Peigné. Suppression of period doubling chatter in high-speed milling by spindle speed variation
Machining Science and Technology, Taylor & Francis, 2011, 15 (2), pp.153-171. ⟨10.1080/10910344.2011.579796⟩

CONTACT

scd.ao@univ-tlse3.fr