M. Ha-abdel-aal, . Nouari, and . Mansori, Influence of thermal conductivity on wear when machining titanium alloys, Tribology International, vol.42, issue.2, p.19, 2009.

I. Abu-mahfouz, Drilling wear detection and classification using vibration signals and artificial neural network, International Journal of Machine Tools and Manufacture, vol.43, issue.7, p.138, 2003.

Y. Altintas and . Ber, Manufacturing automation : metal cutting mechanics, machine tool vibrations, and cnc design, Applied Mechanics Reviews, vol.54, p.84, 2001.

Y. Altintas and . Kilic, Generalized dynamic model of metal cutting operations, CIRP Annals-Manufacturing Technology, vol.62, issue.1, pp.47-50, 2013.

Y. Altintas and . Lee, A general mechanics and dynamics model for helical end mills, CIRP Annals-Manufacturing Technology, vol.45, issue.1, pp.59-64, 1996.

C. Y. Eja-armarego and . Cheng, Drilling with flat rake face and conventional twist drills-i. theoretical investigation, International Journal of Machine Tool Design and Research, vol.12, issue.1, pp.17-35, 1972.

. Eja-armarego and . Whitfield, Computer based modelling of popular machining operations for force and power prediction, CIRP Annals-Manufacturing Technology, vol.34, issue.1, pp.65-69, 1985.

D. Arola, D. H. Ramulu, and . Wang, Chip formation in orthogonal trimming of graphite/epoxy composite, Composites Part A : applied science and manufacturing, vol.27, issue.2, pp.121-133, 1996.

P. Arrazola, L. Garay, M. Iriarte, S. Armendia, F. L. Marya et al., Machinability of titanium alloys (ti6al4v and ti555. 3), Journal of Materials Processing Technology, vol.209, issue.5, pp.2223-2230, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01002827

S. Arul, L. Vijayaraghavan, S. K. Malhotra, and R. Krishnamurthy, The effect of vibratory drilling on hole quality in polymeric composites, International Journal of Machine Tools and Manufacture, vol.46, pp.252-259, 2006.

S. Arul, S. K. Vijayaraghavan, and . Malhotra, Online monitoring of acoustic emission for quality control in drilling of polymeric composites, Journal of Materials Processing Technology, vol.185, issue.1, p.138, 2007.

J. C. Aurich, D. Dornfeld, P. J. Arrazola, V. Franke, L. Leitz et al., Burrs analysis, control and removal, CIRP Annals -Manufacturing Technology, vol.58, p.16, 2009.

Y. Bai and . Dodd, Adiabatic shear localization : occurrence, theories, and applications, vol.12, 1992.

J. Barry, D. Byrne, and . Lennon, Observations on chip formation and acoustic emission in machining ti-6al-4v alloy, International Journal of Machine Tools and Manufacture, vol.41, issue.7, pp.1055-1070, 2001.

S. Basavarajappa, G. Chandramohan, M. Prabu, K. Mukund, and M. Ashwin, Drilling of hybrid metal matrix composites workpiece surface integrity, International Journal of Machine Tools and Manufacture, vol.47, p.33, 2007.

A. E. Bayoumi and . Xie, Some metallurgical aspects of chip formation in cutting ti6al4v alloy, Materials Science and Engineering : A, vol.190, issue.1, pp.173-180, 1995.

S. Bissey, Développement d'un modèle d'efforts de coupe applicable à des familles d'outils : cas du fraisage des aciers traités thermiquement, 2005.

F. Blanchet, Etude de la coupe en perçage par le biais d'essais élémentaires en coupe orthogonale. Application aux composites carbone/époxy, p.27, 2015.

E. Bodart, Une méthode rapide de mesure de l'usinabilité et les essais de longue durée, CIRP ANNALES, vol.12, pp.261-263, 1990.

C. Bonnet, THESE : Compréhension des mécanismes de coupe lors du perçage à sec de l'empilage Ti6Al4V/Composite fibre de carbone, 2010.

M. Bono and J. Ni, The effects of thermal distortions on the diameter and cylindricity of dry drilled holes, International Journal of Machine Tools and Manufacture, vol.41, issue.15, p.18, 2001.

E. Brinksmeier and . Fangmann, Burr and cap formation by orbital drilling of aluminum, pp.31-45, 2010.

E. Brinksmeier and . Janssen, Drilling of multi-layer materials consisting of carbon fiber reinforced plastics (cfrp), titanium and aluminium alloys, CIRP Annals -Manufacturing Technology, vol.51, pp.87-90, 2002.

E. Brinksmeier, S. Fangmann, and . Meyer, Orbital drilling kinematics. Production engineering, vol.2, issue.3, pp.277-283, 2008.

T. J. Burns and M. A. Davies, On repeated adiabatic shear band formation during highspeed machining, International Journal of Plasticity, vol.18, issue.4, pp.487-506, 2002.

M. Calamaz, D. Coupard, and F. Girot, A new material model for 2d numerical simulation of serrated chip formation when machining titanium alloy ti-6al-4v, International Journal of Machine Tools and Manufacture, vol.48, issue.3, pp.275-288, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00911076

S. Campocasso, Développement d'un modèle d'efforts de coupe multi-opérations et multi-matériaux. Application au tournage du cuivre pur dans diffèrents états métallurgiques, 2013.

S. Campocasso, J. P. Costes, G. Poulachon, and A. P. Duarte, Cutting forces modeling in finish turning of inconel 718 alloy with round inserts, Advanced Materials Research, vol.223, pp.75-84, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00724304

. Jl-cantero, J. A. Tard, . Canteli, M. H. Marcos, and . Miguelez, Dry drilling of alloy ti-6al-4v, International Journal of Machine Tools and Manufacture, vol.45, issue.11, pp.1246-1255, 2005.

. T-carlsson, B. Stjernstoft, and . Lindström, A model for calculation of the geometrical shape of the cutting tool-work piece interface, CIRP Annals-Manufacturing Technology, vol.50, issue.1, pp.41-44, 2001.

S. Catche, Analyse des defauts de paroi de trou et de leur criticité sur la tenue mécanique des structures composites percées, vol.33, 2013.

E. H. Chandler, Machining of reactive metals. Machining, 16, 1989.

C. H. Che-haron and A. Jawaid, The effect of machining on surface integrity of titanium alloy ti-6 al-4 v, Journal of Materials Processing Technology, vol.166, issue.2, pp.188-192, 2005.

M. Cherif, Modélisation géométrique des efforts de coupe en fraisage pour la CFAO et la surveillance de l'usinage, 2003.

Y. Combres, Techniques de l'ingénieur, traité materiaux métalliques Doc m, vol.557, p.3, 1999.

S. Coromant, Application guide -titanium machining

M. Cotterell and G. Byrne, Dynamics of chip formation during orthogonal cutting of titanium alloy ti-6al-4v, CIRP Annals-Manufacturing Technology, vol.57, issue.1, pp.93-96, 2008.

M. Cotterell and G. Byrne, Characterisation of chip formation during orthogonal cutting of titanium alloy ti-6al-4v, CIRP Journal of Manufacturing Science and Technology, vol.1, issue.2, pp.81-85, 2008.

A. Daymi, B. Boujelbene, S. B. Salem, B. H. Sassi, and S. Torbaty, Effect of the cutting speed on the chip morphology and the cutting forces. Archives of Computational Materials Science and Surface Engineering, 2009.

B. Denkena and . Kôhler, Consideration of the form of the undeformed section of cut in the calculation of machining forces, Machining Science and Technology, vol.14, issue.4, pp.455-470, 2010.

B. Denkena, J. H. Boehnke, and . Dege, Helical milling of cfrp-titanium layer compounds, CIRP Journal of manufacturing Science and Technology, vol.1, issue.2, pp.64-69, 2008.

. Re-devor and . Kline, A mechanistic model for the force system in end milling with application to machining airframe structures, Manufacturing Engineering Transactions and North American Manufacturing Research Conference, 8 th, pp.297-303, 1980.

D. Dornfeld, Drilling burr formation in titanium alloy, ti-6al-4v, Annals of CIRP, vol.48, pp.73-76, 1999.

C. Nagi-elmagrabi, A. Che-hassan, F. Jaharah, and . Shuaeib, High speed milling of ti-6al-4v using coated carbide tools, European Journal of Scientific Research, vol.22, issue.2, p.18, 2008.

E. O. Ezugwu, J. Bonney, and Y. Yamane, An overview of the machinability of aeroengine alloys, Journal of Materials Processing Technology, vol.134, issue.2, pp.233-253, 2003.

. Eo-ezugwu, Key improvements in the machining of difficult-to-cut aerospace superalloys, International Journal of Machine Tools and Manufacture, vol.45, issue.12, pp.1353-1367, 2005.

. Eo-ezugwu and . Wang, Titanium alloys and their machinability a review, Journal of materials processing technology, vol.68, issue.3, pp.262-274, 1997.

M. Fontaine, Modélisation thermomécanique du fraisage de forme et validation expéri-mentale, 2004.

L. A. Franco-gasca, G. Herrera-ruiz, R. Peniche-vera, R. De-jesùs-romero-troncoso, and W. Leal-tafolla, Sensorless tool failure monitoring system for drilling machines, International Journal of Machine Tools and Manufacture, vol.46, issue.3, p.138, 2006.

B. Furet, Optimisation, préparation, mise en oeuvre et surveillance automatique de l'usinage à grandes vitesses des métaux et des matèriaux composites, vol.46, 2005.

G. Sheng-geng and J. Xu, Surface integrity and fatigue property of a high speed milled titanium alloy, Advanced Materials Research, pp.305-310, 2008.

A. Gente, H. Hoffmeister, and C. J. Evans, Chip formation in machining ti6al4v at extremely high cutting speeds, CIRP Annals-Manufacturing Technology, vol.50, issue.1, pp.49-52, 2001.

D. Germain, Développement d'un modèle d'efforts de coupe intégrant le contact en dé-pouille : application au tournage de superfinition du cuivre Cu-c2, Arts et Métiers ParisTech, 2011.

P. Guegan, Contribution à la qualification de l'usinage de matériaux composites à matrice organique, vol.34, 1994.

M. Hashimura, J. Hassamontr, and D. A. Dornfeld, Effect of in-plane exit angle and rake angles on burr height and thickness in face milling operation, ASME Journal of Manufacturing Science and Engineering, vol.121, pp.13-19, 1999.

H. Hocheng and C. Tsao, Comprehensive analysis of delamination in drilling of composite materials with various drill bits, Proceedings of the 6th Asia Pacific Conference on materials Processing, vol.140, pp.335-339, 2003.

H. Hocheng and C. C. Tsao, The path towards delamination-free drilling of composite materials, International Forum on the Advances in Materials Processing Technology, vol.167, p.32, 2005.

J. Hua and R. Shivpuri, Prediction of chip morphology and segmentation during the machining of titanium alloys, Journal of Materials Processing Technology, vol.150, issue.1, p.11, 2004.

J. Jallageas, J. Knevez, M. Chérif, and O. Cahuc, Modeling and optimization of vibration-assisted drilling on positive feed drilling unit. The International, Journal of Advanced Manufacturing Technology, vol.67, issue.5-8, pp.1205-1216, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02022506

E. Jantunen, A summary of methods applied to tool condition monitoring in drilling, International Journal of Machine Tools and Manufacture, vol.42, issue.9, p.138, 2002.

A. Jawaid, . Che-haron, and . Abdullah, Tool wear characteristics in turning of titanium alloy ti-6246, Journal of Materials Processing Technology, vol.92, pp.329-334, 1999.

D. Jianxin, L. Yousheng, and S. Wenlong, Diffusion wear in dry cutting of ti6al4v with wc/co carbide tools, Wear, vol.265, issue.11, pp.1776-1783, 2008.

. Sg-kapoor, R. Devor, R. Zhu, G. Gajjela, D. Parakkal et al., Development of mechanistic models for the prediction of machining performance : model building methodology, Machining Science and Technology, vol.2, issue.2, p.45, 1998.

M. Kaymakci, Y. Kilic, and . Altintas, Unified cutting force model for turning, boring, drilling and milling operations, International Journal of Machine Tools and Manufacture, vol.54, p.45, 2012.
DOI : 10.1016/j.ijmachtools.2011.12.008

O. Kienzle and H. Victor, Spezifische schnittkräfte bei der metallbearbeitung. Werkstattstechnik und Maschinenbau, vol.47, pp.224-225, 1957.

E. Kilickap, Optimization of cutting parameters on delamination based on taguchi method during drilling of gfrp composite, Expert Systems with Applications, vol.37, pp.6116-6122, 2010.

T. Kitagawa, K. Kubo, and . Maekawa, Temperature and wear of cutting tools in highspeed machining of inconel 718 and ti6al6v2sn, Wear, vol.202, issue.2, pp.142-148, 1997.

H. Jeong, D. Ko, and . Cho, 3d ball-end milling force model using instantaneous cutting force coefficients, Journal of manufacturing science and engineering, vol.127, issue.1, pp.1-12, 2005.

S. Ko and J. Lee, Analysis of burr formation in drilling with a newconcept drill, Journal of materials processing technology, vol.113, issue.1, pp.392-398, 2001.

S. Ko, J. Chang, and S. Kaipakjian, Development of drill geometry for burr minimization in drilling, CIRP Annals-Manufacturing Technology, vol.52, issue.1, pp.45-48, 2003.

R. Komanduri, Some clarifications on the mechanics of chip formation when machining titanium alloys, Wear, vol.76, issue.1, pp.15-34, 1982.

R. Komanduri and . Bf-von-turkovich, New observations on the mechanism of chip formation when machining titanium alloys, Wear, vol.69, issue.2, pp.179-188, 1981.

W. Konig, Applied research on the machinability of titanium and its alloys, Proceedings of 47th Meeting of AGARD Structural and Materials Panel, p.13, 1978.

W. Konig and P. Grass, Quality definition and assessment in drilling of fibre reinforced thermosets, CIRP Annals-Manufacturing Technology, vol.38, issue.1, p.28, 1989.

A. Koplev, A. Lystrup, and T. Vorm, The cutting process, chips, and cutting forces in machining cfrp, Composites, vol.14, pp.371-376, 1983.
DOI : 10.1016/0010-4361(83)90157-x

L. N. Lopez-de-lacalle, J. Pérez, J. I. Llorente, and J. A. Sanchez, Advanced cutting conditions for the milling of aeronautical alloys, Journal of Materials Processing Technology, vol.100, issue.1-3, pp.1-11, 2000.

Y. Landon and M. Chérif, Caractérisation de la qualité de perçage de stratifiés carbone et d'empilages multi-matériaux, JST-AMAC : Usinage des Matériaux Composites, 2012.

F. Lapujoulade and A. Khellouki, Identification de lois de coupe en fraisage latéral à partir d'essais de tournage, Proc. of Integrated Design and Production CPI2003, vol.55, 2003.

I. Lazoglu, Sculpture surface machining : a generalized model of ball-end milling force system, International Journal of Machine Tools and Manufacture, vol.43, issue.5, pp.453-462, 2003.

J. Le and D. , Contribution à la modélisation du perçage assisté par vibration et à l'étude de son impact sur la qualité d'alésage : application aux empilages multi-matériaux, vol.38, p.33, 2014.

C. Leyens and M. Peters, Titanium and titanium alloys : Fundamentals and Applications, 2003.

R. Li, P. Hegde, and A. J. Shih, High-throughput drilling of titanium alloys, International Journal of Machine Tools and Manufacture, vol.47, issue.1, pp.63-74, 2007.

G. Lutjering, J. C. Williams, . Titanium, and . Springer, , 2003.

S. Lutze, State of the Art and Expectations for the Future of Orbital Drilling, 2008.

. Me-martellotti, An analysis of the milling process, trans. ASME, vol.63, issue.2, p.1941

M. William-moore, Fundamental aspects of the woodcutting process, Forest Products Journal, vol.10, issue.9, pp.447-56, 1960.

A. Molinari, G. Musquar, and . Sutter, Adiabatic shear banding in high speed machining of ti6al4v : experiments and modeling, International journal of Plasticity, vol.18, issue.4, pp.443-459, 2002.

F. Nabhani, Machining of aerospace titanium alloys. Robotics and ComputerIntegrated Manufacturing, vol.17, p.21, 2001.

M. Nouari, M. Calamaz, and F. Girot, Mécanismes d'usure des outils coupants en usinage à sec de l'alliage de titane aéronautique ti-6al-4v, Comptes Rendus Mécanique, vol.336, issue.10, pp.772-781, 2008.

K. Palanikumar, Modeling and analysis for surface roughness in machining glass fibre reinforced plastics using response surface methodology, Materials & Design, vol.28, pp.2611-2618, 2007.

L. Pilny, L. De-chiffre, M. Piska, and M. F. Villumsen, Hole quality and burr reduction in drilling aluminium sheets, CIRP Journal of Manufacturing Science and Technology, vol.5, p.17, 2012.

R. Piquet, THESE : Contribution à l'etude des reparations provisoires structurales aeronautiques. Etude du perçage de plaques minces en carbone/epoxy, 1999.

R. Piquet, . Ferret, P. Lachaud, and . Swider, Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills, Composites Part A : Applied Science and Manufacturing, vol.31, issue.10, pp.1107-1115, 2000.

J. Velasquez, Etude des copeaux et de l'intégrité de surface en usinage à grande vitesse de l'alliage de titane TA6V, vol.12, 2007.

P. Rahme, THESE : Contribution à l'étude de l'effet des procédés de perçage-alésage sur l'apparition du délaminage dans les strucutres composites epaisses, 2008.

H. S. Shi-hyoung-ryu, C. N. Lee, and . Chu, The form error prediction in side wall machining considering tool deflection, International Journal of Machine Tools and Manufacture, vol.43, issue.14, pp.1405-1411, 2003.

A. Sabberwal and . Koenigsberger, Chip section and cutting force during the milling operation, CIRP Ann, vol.10, issue.3, p.62, 1961.

L. Sanchez, Rapport : Etude sur la rugosité des alésages dans le cfrp, vol.34, 2011.

H. Schulz, Fraisage grande vitesse des matériaux métalliques et non métalliques, Sofetec, Chapitre, vol.47, p.21, 1997.

S. Segonds, Y. Landon, F. Monies, and P. Lagarrigue, Method for rapid characterisation of cutting forces in end milling considering runout, International Journal of Machining and Machinability of Materials, vol.1, issue.1, p.48, 2006.

M. Seve, Modélisation des efforts de coupe lors de l'opération de profilage de finition d'un alliage de titane ti6al4v, vol.46, 2011.

M. C. Shaw and . Vyas, The mechanism of chip formation with hard turning steel, CIRP Annals-Manufacturing Technology, vol.47, issue.1, p.11, 1998.

M. Shaw, The mechanics of three-dimensional cutting operations. MIT, 1951.

H. Siekman, How to machine titanium, Tool Engineer, pp.78-82, 1955.

J. Sun and Y. B. Guo, A comprehensive experimental study on surface integrity by end milling ti-6al-4v, vol.209, pp.4036-4042, 2009.

L. Surcin, Contribution à l'étude théorique et expérimentale du perçage de plaques composites minces, vol.32, 2005.

J. Haldon and . Swinehart, Cutting tool material selection. American Society of Tool and Manufacturing Engineers, vol.13, 1968.

E. M. Trent, Metal cutting. London, 1999.

C. C. Tsao and H. Hocheng, Evaluation of thrust force and surface roughness in drilling composite material using taguchi analysis and neural network, Journal of Materials Processing Technology, vol.203, pp.342-348, 2008.

. Dh-wang, D. Ramulu, and . Arola, Orthogonal cutting mechanisms of graphite/epoxy composite. part i : unidirectional laminate, International Journal of Machine Tools and Manufacture, vol.35, issue.12, pp.1623-1638, 1995.

M. Wang, B. Xu, S. Dong, J. Zhang, and S. Wei, Experimental investigations of cutting parameters influence on cutting forces in turning of fe-based amorphous overlay for remanufacture, The International Journal of Advanced Manufacturing Technology, vol.65, issue.5-8, pp.735-743, 2013.

T. Wong, P. Kim, and . Kwon, Experimental support for a model-based prediction of tool wear, Wear, vol.257, issue.7, pp.790-798, 2004.

C. Wyen and K. Wegener, Influence of cutting edge radius on cutting forces in machining titanium, CIRP Annals-Manufacturing Technology, vol.59, issue.1, pp.93-96, 2010.

G. Yucesan and Y. Altintas, Prediction of ball end milling forces, Journal of Manufacturing Science and Engineering, vol.118, issue.1, p.56, 1996.

A. Zareena, M. Rahman, and Y. S. Wong, Binderless CBN tools, a breakthrough for machining titanium alloys, Journal of Manufacturing Science and Engineering, vol.127, issue.2, p.21, 2005.

R. Hou-zhen-bin and . Komanduri, On a thermomechanical model of shear instability in machining, CIRP Annals-Manufacturing Technology, vol.44, issue.1, pp.69-73, 1995.